https://youtu.be/QQMP6t3biRs
Can you run wire in a soffit?
There’s no code issue if you maintain the required clearances and cover. You don’t want a stray nail or screw hitting the wire someday. For example, you would need to protect wire that is just below the surface of the soffit with a metal plate.
Does Outdoor rated wire need to be in conduit?
Local codes typically require conduit protection for exterior wiring if the wiring is installed above ground. If you are burying the wiring, most codes allow for underground fed cables, but some will require the use of a conduit. Buried or exposed wiring will need to be listed for its application.
How do you run attic wires from soffit?
Once you drill a hole into the soffit from the outside (or remove the panel entirely) you are essentially into the attic space. I run a wire fish from the outside up the hole I drilled and into the attic space. Then I crawl into the attic and go to the edge and grab the wire fish from the inside and attach the cable.
How do I run cable under soffit?
Quote from the video:
Quote from Youtube video: And then from there we're going to take the cat5e cable and we're going to fish it or pull it back this way through this this cavity with a piece of string. But also you could just sneak the cable.
What wire do you use for soffit lights?
Quote from the video:
Quote from Youtube video: You're going to need some wire for it i'm going to be using 12 2 wire.
Is soffit open to attic?
Soffit vents are roof ventilation devices installed underneath the eaves of a roof that extend past the warm wall line. When properly combined with other roof ventilation devices, soffit vents allow fresh air to enter into an attic creating air flow.
How do you wire outdoor soffit lights?
Quote from the video:
Quote from Youtube video: Because you can see how thin they are they don't require a lot of space there's no housings with these because they're led. You can see they go down this the wire harness down to your junction. Box.
How do you install a junction box in soffit?
Quote from the video:
Quote from Youtube video: See what you wanted to do is just drill through the aluminum. Soffit up here and you don't want to drill through this here because that is where you're going to screw.
How do you hang lights in a soffit?
Quote from the video:
Quote from Youtube video: This is called the soffit clip it's inserted under the eave into the soffit hole and keeps your lights protected from the weather all year.
How do you install a soffit hanger?
Quote from the video:
Quote from Youtube video: You take the bent end of the soffit hanger. And you hook it in the outside edge of your soffiting where your rain trough is. And then you slide the small tube.
How far apart should exterior soffit lights be?
In many applications, designers use a ratio of 1:1 when laying out LED soffit lights. If the lights are 4 inches in diameter, a space of 4 feet is left between them. If they’re 6 inches, they install 6 feet apart on center. This spacing provides ambient light that’s soothing and not over bright.
Where should exterior soffit lights be placed?
Lighting Dark Corners
Using soffit light fixtures, install lights under the eaves around the whole exterior of your house. With another type of lighting – let’s say a larger light fixture or an uplight with limited reach – it is hard to illuminate every area of your house’s exterior, especially tight corners.
What is uplighting and downlighting?
Uplighting refers to lights that are mounted to shine their light upward and are installed at low or ground level. Downlighting refers to lights that shine their light downward; so they would be installed at a higher to point to create this downward light effect.
What size should soffit lights be?
It is best to choose shallow 4-inch or 6-inch recessed housings given the lack of depth in the soffit. You will also need to consider the weather-proof light covers that you will be installing on your fixtures in determining the right size of housing to choose.
