Yes, it does cost you money using the extension cord. Grabbing a random number out of the air, let’s say the fridge draws 2 amperes. If you have a 50 ft. 16 AWG cord, that’s 1.996 watts.
Is it OK to use an extension cord for a refrigerator?
Using a grounded extension cord with a three-prong plug is always the best choice for major appliances including refrigerators. When it comes to amperage, check the owner’s manual for your refrigerator to determine the amperage rating and then choose an extension cord with an equivalent rating.
Does using extension cord use more electricity?
The longer the extension cord, the more power it takes to run to the appliance. An appliance plugged in using an extension cord will use more electricity than if it was just plugged into the wall. For small items, this increase is negligible, but it will add up over time for more significant things.
Can a refrigerator be plugged into a regular outlet?
Refrigerator – Most refrigerators work with a standard 100-120 volt electrical plug and outlet. You will notice that the electrical plug is made up of three prongs; this means you will need an electrical outlet that has three inserts.
Is it OK to plug a refrigerator into a power strip?
Rule two: never plug high power capacity appliances, like space heaters, refrigerators, or microwave and toaster ovens into power strips or extension cords. These appliances have higher power capacity and need to be plugged into a wall outlet directly. Rule number three: always plug power strips directly into the wall.
What appliances use the most electricity when turned off?
These six appliances are some of the worst offenders:
- Television. If you have a modern LED-lit television, you’ll use far less electricity than you would using an older counterpart. …
- Computers. …
- Phones. …
- Stereos. …
- Microwaves and Coffee Makers. …
- Traditional Lamps.
Does leaving an extension cord plugged in use electricity?
Unplugging – Regardless of whether or not it’s being used, as long as a power extension cord is plugged into an outlet, it’s conducting electricity. To avoid potential safety hazards, always remember to unplug extension cords when they’re not in use.
How much power do you lose with extension cords?
How much the voltage will drop over the length of the extension cord is an important consideration for safe and efficient appliance operation. For example, 50 feet of 14-gauge wire will cause a voltage drop of about 3 percent if the supplied voltage is 120 volts and the wire carries no more than 12 amps.
Can you plug a refrigerator in the garage?
Most refrigerators stop working at some point during the winter months in an unheated garage, depending on climate and how well the garage is insulated. Most manufacturers do not recommend placing a refrigerator in temperatures below 50 degrees Fahrenheit.
Is it OK to plug a freezer into an extension cord?
GE strongly recommends that an extension cord not be used with a freezer due to the potential safety hazards under certain conditions.
How do I protect my refrigerator from a power surge?
How To Protect Your Appliances During A Power Outage
- Use surge protecting power strips in your home. …
- Install a whole-house surge protector in your electrical panel. …
- Contact your electricity provider about meter-mounted surge protection. …
- Install GFCI outlets throughout your home.
Can a power surge ruin a refrigerator?
When there is an increase in voltage from a power surge, it causes an inrush of electrical current within the refrigerator. This surge generates an excessive amount of heat, which can damage multiple parts of the refrigerator.
Do they make surge protectors for refrigerators?
The Appliance Surge Protector CSP100R offers vital surge protection for refrigerators and freezers. It prevents spikes in energy caused by storms and electrical power surges from reaching your equipment. The CSP100R provides 900 joules of protection, a surge-protected outlet and a wall tap plug.
What appliances need surge protectors?
But bigger or more important items, as well as appliances that require constant power, such as computers, printers, televisions, and refrigerators, should all use surge protectors. Any device that you don’t want to lose in the event of a power surge, or that would be expensive to replace, should be protected.
What is the difference between a surge protector and an extension cord?
Extension cords are crucial when you need to stretch an appliance from one location to a distant electrical outlet, while surge protectors help keep your equipment safe.
What is the difference between an extension cord and a power strip?
However, the main difference between the two lies in the purpose: If you want to multiply the number of electrical outlets from a single source, use a power strip. If you want to stretch out a power source towards a distant appliance, use an extension cord.
What appliances should not be plugged into a surge protector?
Here are some examples of high-capacity appliances that you should not plug into a power strip:
- Refrigerators.
- Washing machines and dryers.
- Sump pumps.
- Space heaters.
- Portable air conditioners.
- Microwave ovens.
- Toasters.
- Coffee makers.
Should I turn off my surge protector at night?
While these products are designed for surge protection, they can also be an extreme fire hazard when not in use. That’s because surge protectors consume energy even when the devices they’re protecting are turned off. You should turn off surge protector when not in use because it could be causing a fire hazard.
How can you tell the difference between a surge protector and a power strip?
How can you tell the difference? Surge protectors will have a rating in Joules of energy showing the maximum voltage it can handle from a power spike. You can find those numbers on the box or strip itself. If there are no numbers listed, it is just a power strip.
