Do I need a UV light in my furnace?

Yes, if they are installed properly, and use the correct spectrum of UV light. It is up to the homeowner to ensure that conditions are right, and installation is completed correctly by a qualified HVAC technician.

Can I add a UV light to my furnace?





UV lights can be added to the air exchange systems in your house (in your furnace blower or in your air conditioner), or you can add a UV light system to your air ducts. The placement of UV lights is critical to getting maximum effectiveness, and they should be installed by professionals like 4 Seasons Home Comfort.

Are UV lights for HVAC worth it?

Verdict. While a UV light may help sufferers of breathing problems by destroying mold and mildew growth, HVAC UV lights are costly to install and upkeep, and will ultimately cause the need for HVAC repairs due to damage.

Can you install UV light in return duct?

Quote from the video:
Quote from Youtube video: This is the uv light right here is going to kill any type of biological. Issues that may be growing on the coils such as mold. And bacteria.

How much does UV light cost?

Coil UV lights have a light cost ranging between $60-$285, an installation cost ranging between $100-$225, a lamp cost between $10-$60 and an energy cost between $15-$30.

Where should I install UV light in HVAC?





Where to Install UV Lights for Best Results. Depending on your needs and the system you choose, you may install the UV lights directly in the air handler. In addition to the air handler, you may choose to install them in the air return or in strategic areas throughout the ductwork.

How do you install a UV light?

The Five Steps To An HVAC UV Light Installation

  1. #1. Choose Where To Install The UV Light. …
  2. #2. Drill The Hole(s) For The UV Light. …
  3. #3. Screw The Germicidal UV Light To The Furnace. …
  4. #4. Power The A/C UV Light System. …
  5. #5. Change & Clean The UV Light Bulb.


How often should you replace a UV bulb?

approximately every 12 months



Typically, a UV lamp being used primarily to disinfect the air circulating through a home or small office should be replaced every 9000 hours or approximately every 12 months.

How do you replace a UV light on a furnace?

Quote from the video:
Quote from Youtube video: Loosen. The two screws that are holding the bulb in place. And then remove the bulb. Unpack the new bulb that you got insert it back into the hole where the old bulb. Was tighten the screws down.

Do UV lights go in supply or return?

Ultraviolet lamps can be easily added to an existing forced air system. Lamps can be installed either in the main supply or return duct of a central heating or air system. The best installation location for a UV lamp is downstream of the air conditioning coils on the supply side of the heating/cooling system.

How long do furnace UV lights Last?



6 to 12 months

Usage of the HVAC system ultimately determines how often you should replace the UV lights in your air purification units. We recommend changing your UV germicidal light at least every 12 months to maintain a clean, healthy environment. Lamp life is generally 6 to 12 months for most brands.

Can you put metal under a UV light?

Metals are almost entirely unaffected by UV because of the availability of free electrons to absorb photon energy without undergoing energy transitions or bond dissociation.

Can you put fake nails under UV lamp?

Use a good gel base coat. This will ensure that the polish adheres properly and lasts as long as possible. Apply a thin coat over the whole nail, then cure each nail under a UV lamp or LED light to dry it.

How can I dry my nails without UV light?



Hold your nails in ice cold water to harden gel polish.



Stick your nails into the water, making sure that all the nails are completely submerged. Hold your nails under the water for about 3 minutes before removing them from the bowl. Let your fingers and nails air dry for at least an hour.

Can you put diamond ring under UV light?

Precious jewellery should not be exposed to concentrated UV light as this could alter the colour and structure of your gemstones. We advise removing jewellery containing gemstones before UV exposure, i.e. nail lamps or sunbeds.

What glows pink under UV light?

They’re a familiar sight to most, but America’s only marsupial has a secret: beneath their furry exterior, opossums glow hot pink under the right light — not headlights, but ultraviolet light.

Why is my diamond blue under UV light?

Some diamonds fluoresce when they are exposed to ultraviolet (UV) rays from sources like the sun and fluorescent lamps. This can cause them to emit a bluish light or more rarely, a yellow or orangy light. Once the UV light source is removed, the diamond stops fluorescing.