Just insert the tail end into the opening and carefully push the snake back into the container. Use a twisting motion for the first foot or so to help the snake coil up in the container instead of wadding into a bunch.

How do I get the cable back in my Auger?


Quote from Youtube video: You know come out the other side back in the hole to container. Pull it back in. And just with your finger manipulate the cable insert it back into the container.

How do you fix a broken snake cable?





Quote from the video:
Quote from Youtube video: The last open coil and you put it into the first coil of the pitch of the cable. And you start to screw it in. So now you can use vice grips pliers whatever you have available to finish the. Job.

Which way should a snake spin a drain?

As you push the snake into the drain, rotate the handle clockwise. You may need to use both hands on the handle if you are having trouble pushing. To feel for the clog, it is a good idea to move your hands lower on the cable, about three inches above the opening of the drain.

How do you Respool a Cobra drain snake?

Quote from the video:
Quote from Youtube video: If you are replacing a cable on a handheld unit place a 90 degree bend approximately. Six inches from the non cutter end of the cable. This band will allow the cable to coil into the drum.

How do you install a snake cable?

Quote from the video:
Quote from Youtube video: The actual way that it's gonna coil is going to be away from the desk or back towards the desk if you turn it this way it's going to coil. Along the underside of the desk.

How do you replace a mini rooter cable?





Quote from the video:
Quote from Youtube video: Just need a flat head screwdriver for this particular. Model you can't see it right there it's a general mini river xp good little machine. All right gonna go ahead and cut open the new cable.

Can you Unkink a drain snake?

Once full, insert your drain snake cable into the drain and twist the handle clockwise as you slide it down the pipe. Continue until you hit the obstruction. Give the handle a sharp twist and pull to dislodge the clog. If the clog is beyond the u-bend of the pipe, the snake is likely to kink up.

How do you replace the cable on a Hydrostar drain monster?

Quote from the video:
Quote from Youtube video: The cable from here just unscrew that screw then i'm going to take out the lead cable right there from inside just with the long screwdriver. And install the new cable.

How do you remove a stuck snake from the drain?

Quote from the video:
Quote from Youtube video: And see if you can break the cloth loose at all. And if that doesn't work on. The end of these plumbing snakes you can actually hook a drill to it to help relieve the clogging. That's in your pipe.

How do you rewind a rigid snake?



Quote from the video:
Quote from Youtube video: And clear the blockage. Now run the faucet to wash any debris down the drain line and clean the cable then retract the cable using the auto feed trigger by turning the drum counterclockwise.

How do you use a spin through drain auger?

Quote from the video:
Quote from Youtube video: Pull back now after you get through the first or second turn you won't actually have to put your hand on the cable in order to pull back on it there'll be enough friction in the line to do that.

How do you replace a Super Vee cable?

Quote from the video:
Quote from Youtube video: So it's very simple all you need is three tools you need a flathead screwdriver. You need a Phillips head screwdriver for the grippers themselves.

How do you fix a drill snake?



How to Repair a Kinked Drain Snake

  1. Remove the snake completely from the drain. As you pull it out, have a towel ready to clean any debris from the cable immediately. …
  2. Again, slide the snake down the drain, twisting it clockwise as you go down the pipe. …
  3. Clean the snake with a rag as you lift it out.


How do you use a general Speedrooter 92?

Quote from the video:
Quote from Youtube video: Start the machine by stepping on the foot pedal the feed lever controls the feeding rate and direction of the cable. Moves.

How do you use a roto rooter machine?

Quote from the video:
Quote from Youtube video: Start the machine by depressing the foot pedal stop. And start the machine a few times to get the feel of the pedal. Then work the cable into the drain guide the cable into the drain with a firm even.

How do you use a 100 foot drain snake?



Quote from the video:
Quote from Youtube video: Option quickly and smoothly drives. And retracts the cable while keeping your hands clean and safely. Away from the spinning cable operating any drain snake is a one-person job.