A combo device is the combination of switch and outlet in the same enclosure box. The built-in switch can be wired to control the receptacle in the enclosure box. The switch can be also wired through a jumper wire where the switch will control an additional load point such as lighting point.

How do you wire a combination switch and outlet?

Quote from the video:
Quote from Youtube video: One black hot wallbox wire clockwise 3/4 of a turn around the black common terminal screw next to the switch. Tighten firmly next loop the second black hot wallbox wire clockwise 3/4 of a turn around.

Can a switch and outlet be on same circuit?

In your case it is okay to install a receptacle alongside the switch. However you need a neutral as well as a hot wire which you may not have. Test to see if you have a neutral with a test light or meter. The neutral will be white but some switches are wired up with a white wire that is not a neutral.

Can I draw power from a wall outlet to add a light and light switch?

Adding an electrical outlet next to an existing light switch is easy, as long as there is a neutral wire in the box.

  • Step 1: Turn the power supply off to the light switch at the main electrical panel.
  • Step 2: Remove the switch plate and unscrew the switch from the outlet box.
  • Step 3: Pull the switch out from the box.

How many outlets and switches can be on a 15 amp circuit?

Technically, you can have as many outlets on a 15 amp circuit breaker as you want. However, a good rule of thumb is 1 outlet per 1.5 amps, up to 80% of the capacity of the circuit breaker. Therefore, we would suggest a maximum of 8 outlets for a 15 amp circuit.

How many outlets can you run off a 20 amp breaker?

The answer to the question how many outlets on a 20 amp circuit is ten outlets. Always comply with the 80% circuit and breaker load rule, allowing a maximum load of 1.5 amps per receptacle. Remember that your circuit, wire sizes, and outlets must be compatible to avoid overheating and electrical hazards.

Can bathroom lights and outlets be on same circuit?

The Bathroom Needs at Least Two Dedicated Circuits

This is no more. The bathroom electrical code now stipulates that the bathroom must have dedicated circuits that aren’t shared with outlets or lights in any other room. You must provide at least two of these circuits.

How many LED lights can be on a 15 amp circuit?

Assuming a 60 watt light, you can put up to 24 lights on a 15 amp breaker. If you are using low-wattage LED bulbs, an LED bulb using 10 watts, you can install up to 150 bulbs on a single circuit.

What happens when you put a 20 amp receptacle on a 15 amp circuit?

First off, connecting a 20 Amp load to a 15 Amp circuit will overload the circuit but shouldn’t cause a fire because the 15 Amp breaker will trip. A 20 amp GFCI doesn’t pose any threat just by being there.

Can I use 14 gauge wire on a 20 amp circuit?

NO! You cannot use any 14 gauge wire on a 20 amp circuit.