Extending sink drain rough in. Legal? Correct?

Can you extend sink drain pipe?

Quote from the video:
Quote from Youtube video: Using an extension tail piece so we're going to work on the drains we're going to start to attach the drains this is our pea trap comes in two separate pieces.

How far should sink drain pipe extend from wall?

Wall Drains



Like the supply stub-outs, the drain stub-out extends from a fitting — usually a sanitary tee — to a point 3 or 4 inches beyond the wall. The drain, which is usually 2-inch plastic pipe, maintains a minimum slope of 1/4 inch per foot from the stub-out to the point where it ties into a main waste pipe.

How high do you rough in a kitchen sink drain?

The rough-in height for the kitchen sink drain is between 20 and 24 inches. This varies depending on the height of the vanity or counter and the depth of your sink. The taller the vanity or more shallow the sink, the further from the ground your sink drain will be placed.

How far can a sink drain be from the main drain?

The ICC organization’s plumbing codes state that there should be a vent pipe within five feet of any drain. With your new location 35 feet away from the main stack (which is of course vented), you’re too far away from that one, so you’ll need to tie into another vent stack.

Can a sink drain run horizontal?

Drain piping can be horizontal (1/4” per foot), vertical, or 450- vent piping shall be free of sags and be graded and connected to drip back by gravity to drain pipe it serves.

What if new kitchen sink drain doesn’t line up with existing pipes?

In general, if the P-trap doesn’t line up with the drain, you can adjust the length and height of your drainpipes by cutting them or simply slipping them in and out of their fittings.

How far can a sink be from a vent stack?

There is a vent between the sink P-trap and the point where the waste line goes to the main sewer. The vent can’t be more than 2 1/2 feet from the trap if the waste line has a diameter of 1 1/2 inches. The critical distance is 3 1/2 feet if the waste line is 1 1/2 inches.

How do you rough in a bathroom sink drain?

Quote from the video:
Quote from Youtube video: So I don't have a drain line here so if you look there's no place for the water to go. So I gotta fix that real quick because I'm ready to put the toilet and the sink in.

What is the maximum length of a trap arm?

A 2-inch-diameter pipe sloped at 1/4 inch per foot results in a drop equal to the pipe’s internal diameter over a distance of 8 feet: 1/4 inch x 8 = 2 inches (see “Maximum Allowable Trap Arm Length,” above).

How far can a sink drain run horizontal?

If you have 1- 1/4-inch pipe, the horizontal distance of the vent ought to not be more than 30 inches. For a 1- 1/2-inc pipe the vent must be 42 inches away at the most while a 2-inch pipeline must have an optimum distance of 5 feet.

How high do you rough in a bathroom sink drain?

To know about the bathroom sink plumbing rough in heights you must understand that sink drain lines should be between 18 to 20 inches. The water supply pipes must be some inches higher and it should be 20 to 22 inches from the bathroom or kitchen floor and it is generally installed to the drain line sides.

How far can P-trap be from tub drain?

Plumbing Codes



P-Traps must connect to the same size drain outlet, with a diameter of at least 1.5 inches. The vertical distance from the fixture to the trap can not exceed 24 inches. The horizontal distance from the fixture to the trap should not exceed 30 inches.

Can a sink drain have a 90-degree elbow?

It’s fine to have a larger-radius (sweep) 90-degree bend at the base of a vertical drainage stack where the wastewater starts to travel horizontally. It’s also a good idea to have a sweep 90-degree fitting where a drain pipe pops out of a wall for a kitchen, vanity or laundry sink.

Can a drain pipe be angled?

It’s bad plumbing practice to have a hard 90-degree bend in a horizontal drain line that’s buried in a slab or otherwise hidden. If you have to make a 90-degree bend, use two 45-degree fittings and put a small piece of straight pipe between, if possible.

What angle should drain pipes be?

The ideal slope of any drain line is ¼ inch per foot of pipe. In other words, for every foot the pipe travels horizontally, it should be dropping ¼ inch vertically. Many drains either have too little slope or too much slope. That’s right, it is possible to have too much slope in your drain lines.

What is the maximum slope on a drain pipe?

The maximum slope for efficient drainage is usually a drop of 1/2 inch per 1 foot of horizontal distance. A pipe with a very extreme slope of 45 degrees or more is considered vertical. Vertical pipes, or stacks, drain solids and liquids effectively.

What does a 1 in 40 fall mean?

A 1 in 40 pipe fall means that for every 40 units of length, the pipe will drop by 1 unit. For example, in a 40 metre run of pipe, the vertical drop of that pipe run will be 1 metre. It makes no difference what unit of measurement is used. Pipe fall can also sometimes be described as a gradient.

What degree angle is 1/4 per foot?

Low Slope Roofs

How many inches per foot is a 1% slope?

1% as a decimal is 0.01 and hence the slope is 0.01. That means for a run of pipe of a certain length the rise must be 0.01 times the length. Thus for you example, since the length of the run is 80 feet which is 80 × 12 = 960 inches the rise must be 0.01 × 960 = 9.6 inches.

How do you measure the slope of a drain?

Multiply the number of feet of your pipe (X) by the inches you’re planning to slope the line (Y). This will give you the difference in height (Z) between the beginning and end of the pipe: (X) x (Y) = (Z).