What Kind of Extension Cord Will You Need? A 3 prong heavy duty extension cord that can handle 1500W / 13A will work great. Most bidet seats have a power draw of around 500W-1400W. A heavy duty cord from your local hardware store should handle this with no problems.

Can you use an extension cord with a bidet seat?

Is it safe to use an extension cord with a bidet? It’s perfectly safe to use an extension cord with a bidet. You need a 3-wired extension cord that’s rated to handle at least 15 amps (1800 watts) and you need to plug it into a GFCI protected outlet.

How do you power an electric bidet?

How to: add electrical outlet for bidet toilet seats. Most bathrooms have at least one outlet, and an electric-powered bidet will come with a cord to plug into the wall. For instance, Omigo requires a three-prong GFCI grounded outlet that operates on a standard 120-volt AC.

Does a bidet toilet need a dedicated circuit?

Electric bidet seats do not require dedicated circuits as long as there are no other high drawing appliances being actively used on the same circuit.

Do you need an electrical outlet for a bidet?

Bidet toilet seats need to be plugged into an electrical outlet in order to operate. This can be a problem as many household bathrooms do not have an electrical outlet readily available near the toilet. The power cords on most bidet seats are about 4ft long, so what should you do if your outlet is farther than that?

How much power does a bidet use?

How much electricity does a bidet seat use? The average consumption will be about 211.70 kWh. That amount of power adds up to roughly $16.94 per year.

Where do you put the outlet on a bidet?

Since the electrical cords on bidet seats are about 4 feet long, it’s recommended that new outlets be installed on the wall behind the toilet. Most of the electrical cords extend out from the right hand side of the bidet when facing the toilet, so plan accordingly.

How do you power a bidet toilet seat?

Bidets don’t actually need to be electrical. The stream of pressurized water that does the washing in a bidet doesn’t need a power source. The pressure and the water can be delivered by your own water supply and your current toilet set-up. In some models, you can heat the water using your sink’s hot water connection.

How do you install an electric bidet toilet seat?

Quote from the video:
Quote from Youtube video: Pretty easy then there's a mounting plate that goes on top of the bowl. You want to remove the screws. Because what you're going to need now are these little sliders. That go over top of the grommets.

How much does it cost to add an outlet to a bidet?

When it comes to electric bidet toilet seats, hopefully your bathroom already has an outlet close to the toilet. If it doesn’t or if the outlet isn’t a ground fault interrupter(GFI) outlet, you’ll likely need to get an electrician involved. The normal price for installing an outlet is around $100.

Can I use extension cord in bathroom?

Electricity and water don’t mix: if using an extension cord in a kitchen, bathroom, outdoors or in a potentially damp location, plug it only into a ground fault circuit interrupter (GFCI) outlet. Don’t overload extension cords by plugging in appliances that draw a total of more watts than the rating of the cord.

How many amps does a bidet pull?

Most electric bidet seats have a max pull of around 13 amps at top pull. If using a 15 amp circuit, it’s recommended that the seat be on a dedicated line, but if you run it without anything else running at the same time, you can often get by without a dedicated circuit.

Does an electric bidet use a lot of electricity?

The most efficient electric bidets use about 14 kWh/month ($1.85), which is about that of the average printer. The least efficient bidets can consume up to ~160 kWh/month (about $20), but usually cost about $5-10 per month to use.

Do bidets increase water bill?

Bidets do use a little more water every time you use the toilet, so you’ll see some increase in your water bill. However, this tends to be marginal. Velez says bidets usually only use about one-eighth of a gallon of water per use.

Do bidets spray poop everywhere?

No, bidets don’t spray poop everywhere when you use them. Bidets use a concentrated stream of water specifically directed to cleanse your backside and genitals. The waste does not get sprayed all over. Think of it as a safe, spotless wash for your butt.

How much toilet paper do you save by using a bidet?

It is also great for the environment – the average bidet seat user reduces their toilet paper usage by about 75%, from 23.6 rolls per person to 5 or 6 rolls a year. For a family of four, that saves almost 80 rolls of toilet paper – which is a tenth of a tree, and a savings of at least $80 per year.

How long before a bidet pays for itself?

Add a Bidet to Your Main Toilet

Even if you use the cheapest $20 36-roll pack, at 150 rolls per person per year, a bidet at this price would take between 14 and 15 months to pay for itself in a single-person household. In a two-person household, the time to break even is just around seven months.

Are you supposed to wipe before using a bidet?

When you first use a bidet, clean off with toilet paper first before attempting the bidet spray. You don’t need to use soap to use a bidet. Some people do use the bidet like a mini-shower after a bowel movement, sexual intercourse, or for freshening up, but it isn’t a requirement.

Do you dry off after using a bidet?

Once you have cleaned your genital and anal areas, you dry yourself off. Some Bidets have a cloth towel nearby, DO NOT USE! This towel is for drying off your hands only. Most Bidets have a built in air dryer for you to use.