What do you do with extra wires from a ceiling fan?
What do I do with the unused wire for ceiling fan installation?
- Use one switch on the wall to turn on/off the light.
- Use the other switch on the wall to turn on/off the fan.
How do I run a ceiling fan with an extra wire?
Quote from the video:
Quote from Youtube video: Because you can't stretch the wire and cut it too short. And cut right through thing.
Do you need extra wires for a ceiling fan?
It’s important to understand what each wire does and how it connects with the others. Wiring a ceiling fan with four wires is the most common. However, an additional color wire might be included.
Does a ceiling fan need 3 wires?
Two is “normal”. Black for hot and white for neutral. Your fan has 3 wires (4 counting the green ground). You will have a white which you will connect to your neutral and you will have power for light and power for fan.
Can I connect blue and black wires together?
If you only have one switch, connect the black and blue wires. The black and blue wires need to be connected. You will be able to control your fan and lights with a single switch.
Can you connect red and black wires together?
These wires are typically used for switch wiring as well as the interconnection between smoke detectors hard-wired into the power system. You can link two red wires together, or you can link a red wire to a black wire. Since red wires conduct current, they are considered hot.
Why are there two white wires and two black wires?
So, why are there two black and two white wires in your outlet box? There are two black and two white wires in an outlet box because the outlet is in the middle of a series circuit, accepting power from another source and sending it on. Two cables are hot wires, bringing the power in and carrying it onward to the next.
What is the pink wire for ceiling fan?
At your ceiling box you have: – a black wire, this is most likely a “hot” wire (you can confirm with an electrical tester) – a pink wire, this is most likely the “switched hot” from your wall box that can be turned on or off with a switch installed in the wall box. – a white wire, this is most likely the neutral wire.
What does the blue wire connect to on a ceiling fan?
The blue wire from the ceiling fan gets connected to the second live wire from the ceiling. This second wire can vary in color but is most commonly red or black. This connection allows you to power your lights from the second switch. Connect the white grounded wire from the ceiling to the white wire from the fan.
What are the white black and blue wires in ceiling fan?
The black wire from the ceiling fan is the hot wire that runs the motor and turns the fan blades. The white wire is neutral and completes the fan circuit. The blue wire is the hot wire for the ceiling fan light fixture. The ceiling fan motor does not have a ground wire.
What color wires go together on a ceiling fan?
Black wire is for the fan. Blue wire is for the light, if light is included with the fan. White wire is neutral. Green wire is for the ground.
What color wires go together?
US AC power circuit wiring color codes
See Table below. The protective ground is green or green with yellow stripe. The neutral is white, the hot (live or active) single phase wires are black , and red in the case of a second active.
What Colour wires are positive and negative?
The positive current must be red. The negative current must be black. The ground wire, if present, must be white or grey.
How do you connect wires together?
Quote from the video:
Quote from Youtube video: And simply twist them in a clockwise motion just like that just like that and once you see that they are twisted together and I'll just bring it a little bit closer to the camera.
What wire colors mean?
Black wires are hot wires that run to the electrical outlet from the switch. Red wires are hot wires common in a 240-volt outlet or when a wall switch controls the outlet. Blue and yellow wires are hot wires for ceiling fans and three- or four-way switches. White or gray electrical wires are neutral wires.
Does the color of wire matter?
The colors do not matter electrically. A wire is a wire is a wire, regardless of the color of their insulation. The color of the wire itself may matter when you get into higher voltages, but that’s about the type of metal used (aluminum vs copper conductivity, for example).
What are red wires used for?
Red wires are usually used as secondary hot wires. Red wires are also hot and should be clearly marked to avoid the dangers of electrocution. Red wires are commonly used when installing ceiling fans, where the light switch maybe.
