When the ac compressor not working but the fan is running, chances are the outer unit housing the compressor isn’t receiving power. The fan keeps running because the central unit has no such problem. If the compressor isn’t starting, check the wiring connecting the two units.

Why is my AC not working but the fan is running?

If your ac compressor is not working, but the fan is running, someone might have unknowingly set the wrong temperature on the thermostat. In such cases, the room may be already cold enough, so the compressor is not required to operate.

Why is my AC fan on but not blowing cold air?





If your central AC is not blowing cold air, the refrigerant may be the problem. The unit could be running low and need additional refrigerant added. The most likely cause of this is a leak. A leak not only keeps the AC unit from cooling properly, but also it can cause other issues within the home.

Why does my AC turn on but no air comes out?

The common complaint is, “I can hear the air conditioner turn on but no air is coming out.” That’s because coil inside the AC unit is frozen. One reason for AC freeze-up is that the air flow coming into or out of your system is blocked at some point.

Why is my AC not coming on?

Check your breaker box for a blown breaker or tripped fuse. You may be able to fix this AC issue with the flip of a switch. If that doesn’t do the trick, check the wiring in your thermostat. A loose or frayed wire could also prevent your unit from turning on.

Why is my AC fan still running?

AC Unit Is Too Small Or Unable To Match Settings





A too-small HVAC system will often run to keep up with the thermostat setting, leading the fan and blower to run consistently. Additionally, if your area is facing extreme temperatures, your HVAC unit may not reach the desired temperature.

How do I know if my AC fan motor is bad?

Be aware of the following signs and symptoms of a bad AC fan motor.

  1. AC Fan Doesn’t Start. Even though you have the AC turned on, the fan does not start.
  2. AC Fan Doesn’t Stop. …
  3. Slow Rotating Blades. …
  4. Outside Fan Blades Are Still. …
  5. Rattling, Humming, and Buzzing Noises. …
  6. AC Runs Intermittently. …
  7. No Cold Airflow.

Should I turn off AC if it’s not cooling?

So, if your air conditioner isn’t cooling, and you suspect a refrigerant leak, or if you’ve checked the air filter and thermostat to no avail, yes, you should shut your air conditioner off and call us right away.

How do I reset my AC compressor?



How to Reset an Air Conditioner

  1. Power down your AC. Start at your circuit breaker panel and flip the breaker that powers your AC. …
  2. Find the button. Most air conditioning units are equipped with a reset button. …
  3. Hold down the reset button for 3 to 5 seconds and then release.
  4. Restore power to your AC.

Why is cold air coming out of my vents when the heat is on?

This issue could be caused by an improper thermostat setting. Check that the fan blower switch is set to “auto” and not “on.” When the “auto” setting is chosen, the fan will only run during a heating cycle and won’t push air that feels cooler through the vents in between cycles.

How do I get my AC to kick on?



AC Not Turning On? Try These Tips:

  1. Check the shut-off switch.
  2. Ensure the thermostat is set to COOL.
  3. Check the power switch on the inside unit.
  4. Check for a tripped circuit breaker or blown fuse.
  5. Main electrical panel.
  6. Shut-off box near AC unit.
  7. Try a System Reset.
  8. Check the condensate drain line.

Where is the AC reset button?

Look for it first around on the exterior of your machine, especially along the bottom edge near the ground. An AC’s reset button is typically red and visible, so it should be easy to spot. If you don’t see a reset button on the outside, it could be located inside the unit behind the service panel.

Do all AC units have a reset button?

But if you’re wondering where is the reset button or switch on the air conditioner unit, look for a small and red button or switch on the air conditioner. If you don’t find any reset button, your AC probably doesn’t have one, and to reset your air conditioner, you’ll have to do it manually.

How do I reset my thermostat?



Reset the Thermostat

Common methods for resetting a thermostat include installing the battery backward for five seconds, pushing a recessed reset button with a pin or paper clip, or shutting off the breaker to the thermostat for 30 seconds.

When should I reset my thermostat?

Any time you are having an issue with heating and cooling units, such as after a sudden power failure or after your children have had ‘control’ of the system while you’ve been away, resetting the thermostat should be the first thing you try when attempting to rectify HVAC system issues.

How do I fix an unresponsive thermostat?

If the thermostat is still unresponsive, make sure the breaker is shut off and remove the cover. If it looks dirty inside, use canned air or a soft artist brush to clean away accumulated grime that may be affecting its functionality. Then look for issues like loose wiring or terminal screws and tighten them up.

Why the thermostat is not working?



There simply may not be any power going to your thermostat. This could be caused by a poor connection, blown fuse, dead batteries, or a tripped circuit breaker. If all of these areas look good and your unit should be receiving power, the issue lies elsewhere.

How do I know if my thermostat is broken?

The following are six signs that your thermostat is damaged or broken.

  1. Your HVAC System Won’t Turn on. …
  2. Your Air Conditioner or Heater Runs Non-Stop. …
  3. Differing Temperature Readings Throughout the Home. …
  4. Short-Cycling. …
  5. Programmed Settings Keep Getting Deleted. …
  6. There’s No Response to Changes in Temperature Settings.

How do I know if my AC thermostat is not working?

7 Ways to Tell Your Thermostat Is Broken

  1. Thermostat Has No Power. …
  2. AC or Furnace Won’t Turn On. …
  3. Heater or AC Won’t Turn Off. …
  4. Thermostat Doesn’t Match Room Temperature. …
  5. Thermostat Doesn’t Respond. …
  6. Short Cycling. …
  7. Thermostat Forgets Programmed Settings.