https://youtu.be/uBc9nxGY8o0

How do you keep fence posts from rotting in the ground?

Using a post-hole digger instead of a shovel to create your anchor hole is more effective, as it makes the perfect size anchor point. From here, you should fill the hole with about 6 inches of gravel. This will prevent rotting by ensuring that the post is kept dry when water makes its way into the soil.

Will treated posts rot in the ground?





Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure-treated posts, the rot will be slow.

Will fence posts rot in soil?

Fence Posts and Postsavers



Wooden fence posts tend to rot at ground level and this can happen surprisingly quickly, especially in damp poorly drained conditions, with the result that you might need to replace your expensive fence after just a few years, but it doesn’t have to be the case.

Should pressure treated fence posts be set in concrete?

No, fence posts don’t need to be set in concrete, and there are plenty of other ways to fix your posts if this feels a bit too permanent. If you are using wooden posts, concrete may actually be the worst option.

How long will a treated 4×4 post last in the ground?

A treated 4×4 will last 20 to 25 years in the ground if the conditions in the soil and climate are favorable. That number could increase to 40 to 75 years if you install the treated 4×4 in a cement ring rather than the soil. There are a few factors that influence how long the 4×4 can last in the ground.

Should you paint fence posts?





The answer is yes, it is indeed possible to paint concrete garden posts. It’s also a great way to give a new look to your garden posts. There are a number of reasons why painting concrete is a good idea too. It can make your concrete look fresh and new.

Where do fence posts rot?

The main cause is the wood having prolonged exposure to moisture in soil which means fence posts decay at ground level – just above the concrete base. This means the post will still be solid below and above the damaged area. Insect infestations can also cause rotting in wooden fence posts.

How do you keep fence posts from rotting in concrete?

Fill the first three inches up with gravel so the end of the post doesn’t come into contact with the dirt. Gravel allows water to drain quickly away from the post and into the soil. Be sure to place the post in the center of the hole. Finally, fill the entire hole up with cement to the top.

How far in the ground should a fence post be?

The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet). Add about 6 inches of QUIKRETE All-Purpose Gravel into the bottom of the hole.

Should you cement wood fence posts?



First rule, gang: Do not set wooden posts in concrete. Look, no matter what preventative steps you take (and I’ll get to those), eventually wooden posts rot, and eventually you’ll have to set new ones. Not only does burying them in concrete make for more work down the line, it actually can speed up the rotting.

What kind of concrete should I use for fence posts?

Fast-setting concrete is ideal for installing fence posts since it doesn’t need to be mixed in a bucket or a wheelbarrow. Once you’ve finished digging your post holes, add about three to four inches of gravel into the bottom and compact it using a post or a 2×4.

Is 2 feet deep enough for fence posts?

2 feet is the minimum depth that you should dig your fence post holes for. To dig the holes one-third to one-half of the post’s aboveground height, is a general formula. The deeper you dig the holes, the more stability your fence has.

Can you put dry concrete in a post hole?



Fast-setting concrete is ideal for setting posts because there’s no mixing—you simply pour the dry concrete from the bag right into the hole, then add water.

How many bags of concrete do you need for a fence post?

Most fence post holes will need between 1 – 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.

How deep should an 8 foot post be in the ground?

about 2 feet deep

For an average fence post, about 6 to 8 feet tall, prepare to dig a post hole about 2 feet deep. To install a fence post, you’ll need a shovel or post digger, a 6-foot level, soil, and gravel or crushed stone.

What size Post do you use for an 8 foot fence?



A common rule of thumb, is to dig the hole 3 times as large as the post, and to a depth of 1/3-1/2 of the post height above ground. so for a 8′ high fence, using 4×4 posts. dig the holes 12″ in diameter, to a depth of 2 1/2 – 4′. Of course, that’s assuming you’re setting the posts in concrete.

How deep should a 12 foot post be in the ground?

The general rule of thumb when setting a post is that the depth of the post’s hole needs to be one-third to one-half of the actual above-ground height of the post. So, a six-foot-high finished post ideally needs to be buried three feet into the ground.

What is the easiest way to dig post holes?

Quote from the video:
Quote from Youtube video: The first hole has been dug out using a paused hull digger which means you can create a much smaller hole than if you use a spade.

How do you install fence posts in hard ground?

Quote from the video:
Quote from Youtube video: And you just shovel the sand back in because the sand is locked more finer and more granular. And they'll pack down in that hole. And then when you pack all the dirt back in this post a solid.

How do you bell the bottom of a post hole?



This is not an exact science, but a simple a guideline. Flare by digging around the sides of the hole at a slight angle. Flare your footing as much as the opening of the hole will allow, making a gradual slope from the beginning of flare to the base of the post hole, and remove any excess dirt with a shovel.