The best place for a CO detector is on a wall roughly five feet from the floor, where it can measure the air at a height that people in the house are breathing it. A reasonable alternative is placing the detector on the ceiling and six inches from the wall.
Where should a carbon monoxide detector be installed?
Because carbon monoxide is slightly lighter than air and also because it may be found with warm, rising air, detectors should be placed on a wall about 5 feet above the floor. The detector may be placed on the ceiling. Do not place the detector right next to or over a fireplace or flame-producing appliance.
Can I install carbon monoxide detector myself?
If your home doesn’t have carbon monoxide detectors, you can purchase them from any hardware store and install them yourself. Even if the law doesn’t require it, it’s a good idea to install carbon monoxide detectors throughout your home.
How far should carbon monoxide detector be from furnace?
5-20 feet
At a minimum, industry experts recommend a CO alarm be installed on each level of the home — ideally on any level with fuel burning appliances and outside of sleeping areas. Additional CO alarms are recommended 5-20 feet from sources of CO such as a furnace, water heater or fireplace.
How many carbon monoxide detectors should be in a home?
Carbon monoxide detectors should be installed on every level of your home — specifically outside of sleeping areas, in the kitchen, in living/dining areas, and in the garage. Also install one near your gas furnace, if you have one, as well as in the laundry room if you have a gas clothes dryer.
What type of carbon monoxide detector is best?
Top 5 carbon monoxide detectors
- Google Nest Protect. : Best overall.
- First Alert OneLink. : Best voice control.
- Alert Pro. : Budget pick.
- Kidde Nighthawk. : Easy installation.
- Kidde Battery-Operated. : Best value.
How do you install a hard wired carbon monoxide detector?
Quote from Youtube video: We need to do now is drill a hole big enough to hold this box. This is where all your wiring connections.
Does carbon monoxide gas rise or fall?
Carbon monoxide is also known as the “silent killer” since it’s an odorless, colorless, and tasteless gas. It’s slightly lighter than air but not enough to rise to the ceiling in a room. Instead, it tends to disperse itself, mixing with the air and spreading throughout a space.
Do you need a CO detector in every room?
It is important to install CO alarms on every level of your house so all family members can hear the detectors and be alerted to the emergency. You should also have carbon monoxide detectors in every bedroom, outside each sleeping area, and common rooms for extra safety while you and your family are sleeping.
How many square feet does a carbon monoxide detector cover?
between 2,000 and 7,500 sq. ft.
The area covered by one detector can vary between 2,000 and 7,500 sq. ft. depending on the way the garage is ventilated and the location of the sensors.
How many natural gas detectors do I need?
Obviously, you should keep a natural gas detector near sources of natural gas, such as ovens, water heaters, and fireplaces. But you should also consider installing at least one alarm per floor so that all family members can see and/or hear it. Monitoring.
What is the difference between a carbon monoxide detector and a natural gas detector?
Most fire detectors will detect carbon monoxide rather than natural gas. Again, this is because carbon monoxide is considered to be the greater threat: Though natural gas is more volatile, it is also more easily detected without a detector.
Do you need a carbon monoxide detector for natural gas?
Some people are under the impression a CO detector will also detect natural gas, but that’s simply not the case. Merts recommends gas detectors in all homes but especially in homes with multiple gas appliances. This includes fireplaces, stoves & ovens, clothes dryers, and water heaters. It’s just common sense.
