How do I run cable to the second floor?

Quote from the video:
Quote from Youtube video: Inside this hole here and then I started with the top this 2×4 right underneath right behind the base port here. So I drill through that using my 3/4 once I got through the top layer.

How do you fish wire through walls without fish tape?





Quote from the video:
Quote from Youtube video: Basically. And on the end of it you've got a nice ring to put on your thing but this is magnetic as you saw it stuck to the drill. And then this is also. So basically you just roll that down the wall.

How do you fish a cable through a wall?

Quote from the video:
Quote from Youtube video: Directly below the box feed your fish tape into the wall opening. Pushing it up into the hole you made in the topically. If you're running cable through a basement or crawlspace. Push.

How do you drill through a basement floor?

Quote from the video:
Quote from Youtube video: You can use that or a flat spade. Bit this just drills a little quicker.

What can I use instead of fish wire?

Fish Tape Substitutes

  1. Use a thin-bladed tape measure to run through the path where the wire will be installed. …
  2. Remove the Coil from the end of a flat plumbing snake. …
  3. Break the eyelets from an old fishing pole to make a fish stick for short, straight runs.





How do you run wire through a first floor ceiling?

Quote from the video:
Quote from Youtube video: They make drill bits. That are this long and flexible. So what you do is you get to where you need to go and if you have to go over to the next can you'll slide this in bend.

Is it OK to drill holes in floor joist?

You can safely drill joists for electrical and plumbing runs without weakening the joists, if you follow the rules. By the DIY experts of The Family Handyman Magazine. Where and how to drill joists for electrical cables or plumbing runs depends on what type of floor framing you have. Keep the hole at least 2 in.

Is it OK to drill into basement floor?

Sometimes there is no way around it, you need to drill holes into a concrete floor. But if you use the right tools and follow some safety advice, you shouldn’t have any problem drilling the holes yourself. Read on to learn the detailed steps of drilling into a concrete floor!

How do you run electrical wire through floor joists?



To run cable through a floor that contains a cross joist, cut a hole in the cross joist in the cavity closest to the cable`s entry point. Then, run the cable through the hole in the cross joist and through 1/2-inch holes in each joist between the entry point and the communications outlet.

How do you fish wires through a ceiling?

Quote from the video:
Quote from Youtube video: And find this fishing tape and then pull it through. And what I'll do is all tape some of my wire to the end of this and then feed it back through the wall.

Can you pull new wire through old conduit?

In ideal situations, you’ll work with a conduit that still has old wire running through it. In these cases, you can simply attach the end of the old wire to the end of the new wire and use it as a pull wire, pulling the new line through the conduit.

How do you fish wire through an insulated wall?



push the bit through the insulation, using short jabs, at an upward angle, toward either back corner. if there is paper, foil or plastic on your side, just cut through it. when the bit hits the back corner, walk the bit into and up the corner by giving the drill short bursts (forward or reverse, whichever works better)

How do you fish Romex through walls?

Quote from the video:
Quote from Youtube video: And we just twist it around twist it around okay and we uh pull it pull down pull it through see with the weight. It pulled through on its own. We've got the romex. We have the romex still tied to it.

Can you run Romex in insulation?

Can I Use Insulation with Romex? Yes, insulation actually goes pretty well with Romex – and is, in fact, recommended.

How do you feed cable down a cavity wall?

Quote from the video:
Quote from Youtube video: And there is a cavity between these two walls. There is a cavity right here it's about this wide. So instead of running conduit on the outside. We feed through this cavity.

Can you put cables in cavity?



Do not install cables within external cavity walls. The cavity is there for a reason and its not for running cables.

Does cable through wall need to be in conduit?

There is no requirement to duct or tube a cable passing through a wall. The reg referred to above is for a conduit system or cable ducting system. In other words where the cabling system is employed it must be made continuous through the wall.