How do you fix messed up hardwood floors?

For deep gouges or dents, you can use a wood floor filler and wood stain to repair the damaged area. Before applying the filler, tape off the damaged area so you don’t accidentally apply filler where it doesn’t belong. Mix equal parts of the epoxy-based filler and apply to the gouge with a putty knife. Allow to dry.

Can you redo part of a hardwood floor?

Hardwood floor refinishing can help you get rid of those unsightly scratches and marks. But as long as the damage is shallow—in the coating and not in the wood itself—you can renew the hardwood floor by adding a new coat of polyurethane right over the old finish.

Can you redo hardwood floors without sanding?

The best way to refinish wood floors without sanding is to use a technique called screen and recoat. This involves scuffing up the finish with a floor buffer and applying a refresher coat of finish.

Can dents be removed from hardwood floors?

There are 3 main methods to easily fix dents in a hardwood floor: abrasion: using a fine steel wool pad that will gently remove the scratches without damaging the hardwood floor; wood fillers/ putty: if you need to fix a gouges; the third method is using water.

How do you fix solid oak flooring?

Quote from the video:
Quote from Youtube video: Use a hammer and chisel to remove enough of the bottom of the architrave. That the solid wood will fit underneath it. Be sure to leave a 10 to 12 millimeter expansion gap.

Can you sand a section of hardwood floor?

You’re going to want to use a fine sandpaper, such as a 120 grit. Using a sanding block (the sandpaper wrapped around a block of wood), sand the area so that the urethane finish comes off, then continue sanding so that the stain comes off. If this isn’t working, try medium grit sandpaper (80 to 100 grit).

Can you hand sand hardwood floors?

The palm sander is definitely the most common tool for sanding a wooden floor by hand. Palm sanders also oscillate, however, unlike orbital random sanders, the pad of the palm sander is fixed straight.

How do you get indentations out of wood?

Quote from the video:
Quote from Youtube video: Add a few drops of water to the dent. And let them soak in for a couple of seconds. Now take a damp cloth lay. It over the area and with an iron set when it's hot a setting.

How do you get dents out of finished wood?

Place the tip of a hot iron on the cloth directly over the dent and apply a small amount of pressure. Hold it there until steam begins to rise up. When the cloth begins to dry out, remove the iron and cloth. Check the dent.

Can you use wood filler on hardwood floors?

Can I Use Wood Filler on Wood Floors? Unless the gap is seasonal and will close eventually, you can use wood filler to repair narrow gaps and cracks. Fillers can be water or solvent-based.

What is the best filler for wood floors?

  • Best Overall: DAP Plastic Wood All Purpose Wood Filler. …
  • Best Multi-Use: Minwax Color-Matched Wood Filler. …
  • Best Exterior: 3M Bondo Wood Filler. …
  • Best Interior: Elmer’s Carpenter’s Wood Filler Interior. …
  • Best for Flooring: Coconix Professional Floor and Furniture Repair Kit.

    • How do you refinish hardwood floors with gaps?

    How to Fix Old Hardwood Floors With Gaps and Cupping

    1. Examine the Floor. Examine the cross-section of the floor in a doorway to determine its sanding history. …
    2. Wash the Floor. …
    3. Thin the Floor Filler. …
    4. Apply the Filler. …
    5. Sand the Floor. …
    6. Vacuum the Floor. …
    7. Use a Disc Sander. …
    8. Apply the Stain.

    Will polyurethane fill cracks in wood floor?

    Sawdust and Unfinished Floors



    Mix the dust with some polyurethane and fill the cracks. Note that this method only works on an unfinished floor and will clash with pre-finished floors.

    Are wood putty and wood filler the same?

    Wood putty is denser than wood filler, and it’s so pliable you typically have to apply it with a putty knife. Like window glazing or plumber’s putty, wood putty is a mixture of plastic and oil-based solvents. Because it doesn’t harden like wood filler, wood putty won’t shrink or crack, but you can’t sand it.

    How do you make wood filler for hardwood floors?

    Quote from the video:
    Quote from Youtube video: If it's too wet you can add more sawdust. And if it's too dry you can add a little more shellac oh. And you don't need to mix quite as quickly as I did here.

    What can I use instead of wood filler?

    What Can I Use Instead Of Wood Filler?

    • Wood glue – Fill holes using toothpicks and wood glue.
    • Wood glue and sawdust mixture.
    • Wood putty.
    • Caulk.