A: There are several options for patching divots in granite and other natural stones, including two-part epoxy, polyester resin mixed with hardener, and acrylic resin cured with ultraviolet light.

How do you get pits out of granite?

Aim a stream of air from a can of compressed air at the pits to blow out loose dust and debris. Scrape food particles or bits of soap out of the pits with a sharp wood toothpick. Wet a sponge or rag and wipe the pitted area and the surrounding surface. Dry the granite with a soft rag.

How do you fix rough spots on granite?





To fix rough spots on a granite countertop, you can:

  1. Use epoxy resin to fill the hole and repair its smooth finish.
  2. Use a store-bought granite countertop repair kit.
  3. Hire a professional to do a longer-lasting repair.

How do you make granite smooth again?

Polishing your granite countertop is extremely similar to cleaning it. However, this time you will let a polishing solution sit for 3 to 4 minutes before wiping it up. Afterward, buff the countertop with a soft cotton cloth until there are no streaks remaining.

How do you resurface granite?

How to Resurface Granite Countertops

  1. Step 1: Remove the granite countertop.
  2. Step 2: Clean the countertop.
  3. Step 3: Be well prepared.
  4. Step 4: Use methylene chloride before resurfacing.
  5. Step 5: Make the granite countertop smooth with a sandpaper.
  6. Step 6: Laminate the granite countertop with a brush.

Can pitted granite be repaired?





Can they be fixed? The short answer is yes, most pitting can be filled with epoxy. However, very shallow pitting may not be able to be filled properly as there is not enough surface area for the epoxy to adhere.

Is pitting normal in granite?

ANSWER: Pitting in a granite counter top is not a common maintenance issue, but it can happen. As the granite is extracted from the earth it is cut multiple times and any of these cuts can create faces where the various minerals in the stone are suddenly without the surrounding support that it naturally had.

Can granite countertops be reglazed?

The expert solution to countertop reglazing is from Perma-Glaze. Perma-Glaze’s Liquid Granite is one of the most exciting innovations to come our way in years! This new, innovative technique will save you hundreds to thousands of dollars when compared to a granite installation!

Can granite countertops be repolished?

Once you’ve re-polished on your granite surfaces, they need to be re-sealed. This will maintain the sheen while protecting porous stone from stains. Going Granite recommends a penetrating sealer because they offer the best protection for granite and most other stone surfaces.

Can granite be sanded and refinished?



Refinishing involves sanding the granite, sealing with silicon-based impregnators, and then polishing. Polishing is a process where a high-quality granite polishing compound and buffing pad brings the granite countertop restoration to a beautiful finish.

Does granite sealer fill pits?

Sealers work below the surface. They don’t fill anything that you can see. Also, you should not have pits in the surface. True, some granites can develop a few pits as some crystals come loose with use, but new granite should be mirror smooth.

Is there a filler for granite?

MagicEzy Stone Repair Ezy: (Black) Marble, Granite, Quartz Countertop Chip Repair Kit | Stone Fix, Laminate, Corian, Travertine| Super Strong Seam Filler.

What causes pits in granite?



“Pitting” occurs because of the crystalline composition of granite. As granite was formed and cooled deep beneath the earth’s surface small empty pockets developed between the various mineral crystals in the stone. Over time these voids were filled with softer minerals.

How do you fix uneven granite countertops?

A: If you want to fix this yourself, you should pry out all the loose filler, then refill with two-part epoxy tinted to match the stone as closely as possible. Tape along both sides of the seam first so the epoxy doesn’t smear over the stone surface.

Why is my granite countertop gritty?

Grit on granite countertops is usually due to a low-grade / poor quality slab that cannot be fully polished. All the mineral grains of the granite will continue to flake off. Your options are to replace the countertop or apply a permanent topical coating to bind the granite surface.

Do granite countertops have imperfections?

While natural stone is famed for its distinctive beauty, imperfections in granite countertops and other stone surfaces can be a concern for some. For instance, prospective stone buyers might worry that the “flaws” in natural stone could take away from the unity and elegance of their design.