https://youtu.be/MTAEN_rPbPw
How do you secure a flexible duct?
Quote from the video:
Quote from Youtube video: Take your flexible duct peel back the plastic liner. Then peel back the fiberglass insulation to expose the inner liner. The inner liner goes around the take off all the way around and it smooshes.
Where is flexible duct used?
Flexible or flex duct is an integral part of an air conditioning system. The flexible ducting connects the heating and cooling system ductwork to the air distribution. This is comprised of grills and registers that are mounted in a commercial building’s ceiling or walls.
What can I use for ductwork?
Duct Sealing Methods
- Duct Sealing Tape. One of the ways you can seal leaky ductwork is with hvac duct sealing tape. …
- Mastic Duct Sealant. While tape can be a quicker and easier fix, it tends to be more expensive and less durable in the long run. …
- Aeroseal Duct Sealant.
How do you connect a round duct to a flex duct?
Quote from the video:
Quote from Youtube video: So now we'll take some duct tape. And this is about two inches wide. And just put it halfway on to the Flex duct and halfway on to the bare metal. Other thing you're taping. And work your way around.
How do you support vertical flex duct?
Quote from the video:
Quote from Youtube video: If Ducks are to be installed in a vented uninsulated attic or crawlspace hang the ducks with supporting straps or saddles of sufficient width and frequency to adequately support the Ducks.
Should flex duct be insulated?
When flexible ducts are located outside the conditioned space, they should be sealed to prevent loss of conditioned air and also insulated to prevent thermal loss or gain from the ambient air. All ducts, whether rigid or flexible, should be sealed with UL-181–rated duct mastic.
Can you use flex duct for a return?
Yes, you can use flex ducts for your return air. However, to maximize its usefulness, it needs to conform to technical specifications such as its insulation rating, pressure checks, dust filters, duct sizing and placement, and lastly, the installation requirements.
How long can you run flexible duct?
5 feet
It says, “Length limitation: Factory-made flexible air ducts and connectors should not be more than 5 feet (1,524 mm) in length and shall not be used in lieu of rigid elbows or fittings.”
Does Flex duct reduce airflow?
If you’ve ever seen kinked or sagging flex duct and wondered whether that was a problem, you were onto something! Since flex duct, by definition, is flexible, it often flexes in ways we don’t want it to. The result is poor airflow and ineffective HVAC systems.
How do you secure round ductwork?
Quote from the video:
Quote from Youtube video: Way which side do I need to crimp well let's say that this was on there this is our piece of duct that we've cut in our male. Side is good and what we need to do is you need to crimp this side.
How many CFM do I need for flex duct?
CFM Sizing Chart For Flex Round Ducts (50-1,700 CFM)
| Duct Size (Inches) | Flex Duct Airflow (CFM) |
|---|---|
| 10 inches | 300 CFM |
| 12 inches | 480 CFM |
| 14 inches | 700 CFM |
| 16 inches | 1,000 CFM |
Should ductwork be off the ground?
Even though there is a few small holes in the supply duct it will probably not be enough for the area. In unconditioned spaces all metal duct should be insullated to combat condensation. With the duct being on the ground plastic or not this will still cause uneeded ware and tare.
Can flexible ductwork lay on the ground?
The ducts must be installed such that the straps cannot slip between any two spirals and arranged under the floor to prevent compression or kinking in any location.”
Can I use PVC for ductwork?
PVC is durable and not prone to corrosion or denting, which makes it a good option for ductwork. Because it resists moisture, PVC is preferred when you install ductwork directly beneath the floor in a building with no crawl space.
Should cold air returns be high or low?
To ensure efficiency during the cooling season, your home should have high registers. High return registers draw hot air that rises to the ceiling back into the system to repeat the cooling cycle.
Do you need a cold air return in every room?
While it is a myth that air return grilles are required in each and every room in the house, it is definitely necessary to have more than one of these grilles installed at strategic places in the house. The most important place to have these would be the bedroom.
What happens if there is not enough return air?
If there is not enough return air available, your HVAC system will not heat or cool properly. They must be properly sized — Return air ducts must be large enough to carry a sufficient amount of expended air back to your furnace, air conditioner, or heat pump.
