Why are my soft close hinges not working?

When a soft-close hinge has stopped working, it’s most likely due to one of the screws becoming loose. This will cause the hinge to come out of place or allow the door to sag down. To repair this, all you need to do is find the loose screw and tighten it with a screwdriver.

How do you adjust soft close cabinet hinges that won’t close?





Quote from the video:
Quote from Youtube video: So if I check this door if I close it we have a really big gap here and my doors are uneven. So what I'm going to do is I'm actually going to close the gap a little bit. By letting that one out.

How do you fix soft close kitchen cabinets?

Quote from the video:
Quote from Youtube video: Hold on to the door tightly you want to drop. It. Once you remove the door from the cabinet. It just takes two screws per hinge to remove it from the door. Once the screws are off pop out the hinge.

Can you adjust the tension on soft close hinges?

Shut the door so that the inner cabinet or cupboard is completely concealed. Take a moment to focus on the soft close hinge and find the adjustment tab. Look for gray or silver plunger in the center of the hinge. To confirm that it’s the adjustment tab, try pulling on it with the tip of your finger.

How do you adjust the tension on a soft close drawer?

Quote from the video:
Quote from Youtube video: And locate the tilt adjustment lever. Behind the lever is a flat metal glide pin that must insert into the hole at the back of the drawer to close check both the left. And right sides.

How do you fix a self closing hinge?





Quote from the video:
Quote from Youtube video: Say 90 degree open doors. You can't go past four holes continue to use the pin. And the allen key to move it clockwise until the desired tension is achieved.

How do you fix a cabinet that won’t close?

Quote from the video:
Quote from Youtube video: What we'll need to do is loosen these two screws here and the same two fixing screws on the top hinge. And then lift the door up to where you think it's going to be Oh perfect right there.

How does a soft close hinge work?

A soft-close hinge is a type of hinge that features a hydraulic mechanism built into it. When you close the cabinet door, the hydraulics take charge and ease the door closed in complete silence in somewhat of a gliding motion.

Can soft close doors be adjusted?

You can adjust your cabinet door and drawer with the medium hinge setting. So, if you want to adjust the hinge of the soft close door then, you will have to turn and adjust the lever in a clockwise direction.

How do I change the speed on my soft close hinges?



Quote from the video:
Quote from Youtube video: So the easy way to fix it is to take a flathead screwdriver. Go in here and you'll see a dial indicator that has three settings. If you move it down.

Why won’t my cabinet doors close all the way?

Examine the doors and hinges – Look over each part of the cabinet door, inside and out, opening and closing each door to see if it rubs or catches. This helps you identify why each cabinet door doesn’t close all the way and pinpoint whether there is an issue with the hinge or with the door.