How do I reset my FloodSafe dishwasher hose?

Disconnect the FloodSafe™ at the shutoff valve. This will automatically reset the FloodSafe™ device. 3. Reconnect the FloodSafe™ according to installation instructions and turn on water supply to full open position.

How do you reset a flood defender valve?

Quote from the video:
Quote from Youtube video: Water to reset the flood safe if water flow has been stopped. Simply shut off the water flow to the stop valve disconnect. The flood safe from the stop valve.

How do FloodSafe hoses work?

These are special flexible water supply connectors, aka ‘hoses’, with a mechanism that will completely shut off the flow of water if the hose bursts. These connectors are made for faucets, toilets, ice makers, dishwashers, and washing machines, and can be identified by an extra length of metal at the hose inlet.

What is a flood defender?

The Flood Defender by Eastman is a 10-foot universal ice maker connector with a 1/4-inch inlet that prevents potential damages caused by ice maker leaks. It is designed with a built-in auto-shut-off valve that activates when excess water flow is detected, protecting your floors and surrounding fixtures.

How does a flood stop valve work?

A. In their normal position, the FloodStop valves are open and will allow water to pass through; once water touches their sensor, the motorized ball valve is tripped and the valves are closed. The valve(s) will remain closed until the sensors are dried and the reset “Open” button is pressed.

What to do when FloodStop beeps?

The low battery indicator light will now stop flashing and the beep will stop. – Unplug 6-pin connector from Control Panel and reconnect. – Locate plug connection between Control Panel and the FloodStop Valve that does not operate. Unplug the connection and reconnect, making sure arrows on side of plugs line up.

Should my FloodStop be open or closed?

The FloodStop Valve is closed until you push the open button. The leak sensor needs to be dry before the FloodStop Valve can be opened. The Leak Sensor can be dried off without the need for the AC Adaptor to be plugged in.