Why is the flame on my gas fireplace low?
The little flame you see in your gas fireplace after you have turned it off is called a pilot light. A Standing Pilot Light runs constantly, whether your fireplace is on or off.
How do you adjust the regulator on a gas fireplace?
Quote from the video:
Quote from Youtube video: You'll go back behind the piece of equipment. And unthread this silver cap that's in the very center of the regulator. Once you have that cap off you'll notice that there's a plastic adjustment.
How high should the flames be on a gas fireplace?
Then, turn the gas on and light the pilot. Turn the burner on and set the flame height to high. Take a reading. This time, you want to see an ideal reading of 3.5 inches or the pressure rating indicated in the manual.
Can you make flames bigger on gas fireplace?
Turn the key valve counterclockwise as far as it will turn to open the gas line. Start the fire by following your gas fireplace lighting instructions. Turn the gas control knob to high to increase the flames in your fireplace if applicable.
How do you adjust the airflow on a gas fireplace?
Quote from the video:
Quote from Youtube video: Head right here you loosen that up you twist this it's opening on both sides. Gets bigger or smaller. So it's all based on elevation.
What happens if gas pressure is too low?
If the gas pressure is too low, your furnace’s efficiency will go down. Not only that, but it will lead to a greater amount of condensation of burned gases. That is because the proportion of air in the air-fuel mixture will be too great.
How often should gas regulators be replaced?
Regulators. Gas regulators should be replaced every 10 years, visual signs of age are usually noticeable. But there is always the date of manufacture stamped into the body of the regulator.
How do you reset a natural gas regulator?
Quote from the video:
Quote from Youtube video: First turn off all natural gas appliances unscrew the cap if it is a manual regulator. With your fingers pull the plunger. And then replace the cap.
Where is the pilot light adjustment screw on a gas fireplace?
Quote from the video:
Quote from Youtube video: Now I will show you how to adjust the pilot flame the adjustment screw of the pilot flame is behind this cover we can press through this cover. And find the adjustment screw.
Are gas fireplace flames adjustable?
Instead of burning wood in a fireplace, some homeowners choose to install fireplace logs fueled by natural gas or propane. Once lit, controlling the ambiance and amount of heat produced is a matter of adjusting the flame of the fireplace gas logs.
How do you clean the burner port on a gas fireplace?
Scrub the burner ports with a soft brush or toothbrush. Use compressed air to clear debris from the burner ports. Vacuum a second time to remove newly loosened debris. Return rocks and logs to their previous position and relight your fireplace.
How do I make my gas fireplace brighter?
The flame color on your gas fireplace can be adjusted by using the manual knob on the front of the unit. Turning the knob towards RED will make the flames brighter and more orange, while turning it towards BLUE will make them darker and more blue. You can also use the flame height adjustment knob to change their size.
Should gas fire flames be blue or yellow?
blue flames
Gas fireplaces have blue flames because their flames are hotter than the traditional orange and yellow flames. The blue flames being emitted from your fireplace are evidence that your gas is being burned properly and everything is combusting as it should.
Why is my gas flame orange and not blue?
If you see orange, yellow or red flames instead of blue flames, the burners may need cleaning or adjusting. The orange colour warns you that the gas stove has inappropriate combustion, and it may emit treacherous levels of carbon monoxide gas (CO).
What colour is a good gas flame?
blue
A natural gas flame should be blue. Not having a natural gas blue flame color or an LPG (propane) blue flame color, and having yellow or red flames instead, could be indicative of an appliance problem.
What does blue flame in gas fireplace mean?
complete combustion
A blue gas flame colour means complete combustion. This indicates that the gas is being burned efficiently without any unburned and wasted gas. With complete combustion you get the maximum heat output from your gas and use less gas to generate heat with whatever appliance you are using.
What is the difference between blue flame and red flame?
A blue flame colour and temperature means complete combustion. Red flames or yellow gas flame colour may be a sign of incomplete combustion, wasted gas and a serious safety hazard.
What is the difference between a blue flame and an orange flame?
Blue flames are hotter and indicate more complete combustion. If your flame is yellow or orange, or if you see pops of yellow or orange, that is a sign that you have a combustion problem that should be addressed by a professional.
