What is the lever on the side of a fireplace for?
in your home are turned off when burning your fire. Also, some wood burning fireplaces have a lever to open or close the outside air vent to the fireplace. If your fireplace has this lever (usually located on the left inside panel) make sure the outside air vent is in the open (or up) position.
Why does my gas fireplace turn off by itself?
One of the main reasons why your gas fireplace keeps shutting down is likely due to the pilot light. This is an integral part of a gas fireplace, that kick starts the gas fire. When you turn on the fire, the pilot light button needs to be held in so that it can light the fire.
How do I turn my gas fireplace back on?
Turn the knob from the “Off” to the “Pilot” position. Push in the pilot knob, which manually sends gas into the system. Push the igniter button once every second until it lights. Depending on how long it’s been since the gas fireplace was last used, ignition may take multiple attempts.
How do you turn off a gas fireplace valve?
Quote from the video:
Quote from Youtube video: It turn up to the pilot. Position you press it in a little bit and you can go ahead and turn that to the off position that shuts the gas off to the entire fireplace.
How do I know if my damper is open or closed?
Before lighting a fire, you can tell if the damper is open by placing your hand into the fireplace. If you feel a draft coming down the chimney, it is a good indicator that the damper is open. If you don’t feel any cold air coming down the chimney, it means that the damper is closed.
What is the knob next to fireplace?
It is the gas supply adjustment valve. The knob raises or lowers the flame in the fireplace.
Where is the gas shut off valve for gas fireplace?
Gas fireplace: The shut-off for a gas fireplace is typically on the control panel. This control panel can be found behind the front screen, where a knob that controls the flow of gas can be turned to ‘off’.
How do you tell if gas valve is on or off?
Quote from the video:
Quote from Youtube video: But again the principle is the same you once the handle is in line with the pipe or parallel with the pipe. Then the gas is on if you turn it the other way the gas will be off.
How can you tell if a gas valve is open or closed?
Gas shutoff valves
When the long side of the nub or handle is parallel to the incoming gas line, it’s open and the gas is flowing. When it’s turned a quarter turn, perpendicular to the incoming pipe, it’s closed.
How do I know if my gas fireplace flue is open or closed?
Feel the Breeze
Feeling the breeze is another method you can use to know whether you have an open or closed flue. Locate your hand inside the fireplace and wait to notice if you can feel the air flowing. When the flue is open, air will flow down the chimney.
Which way do you turn the damper?
Quote from the video:
Quote from Youtube video: At you can look at it and say oh horizontal that means that's open if i turn it at an angle it's going to cut down the amount of air going through that duct. So what you do is you loosen the wing.
How do you open the damper on a gas fireplace?
Quote from the video:
Quote from Youtube video: When it's when the handle is over to the left it's fully closed and that would be the position that you would keep that damper in whenever you're not using your fireplace if you move it to the right.
Should fireplace flue be open or closed?
You should close the damper on your fireplace once the fire and embers have all burned out. This prevents warm air in your house from escaping out the chimney. You should open the damper before lighting a fire and close it once the fire is done burning.
What is the knob on the side of my wood stove?
Damper vents work just like large bolts with flat heads that close over the holes when you turn the knob. If the stove only has one vent, the knob will be centered on the door; if it has two, they will be side by side. Turn the knobs clockwise to reduce the airflow, or turn it counterclockwise to increase airflow.
How do you use a fireplace damper?
Quote from the video:
Quote from Youtube video: So again you want to make sure that your damper is fully open when you have a fire that is lit and you want to make sure it's fully closed to keep from any heat from escaping.
How do I close my fireplace damper?
To open or close the damper, lift the handle and push or pull to move the damper to the desired position. Replace the handle when the damper is in place. Rotary dampers. As the name implies, rotary damper work on a rotating system, with long, screw-like rods that move the damper.
Where is the damper on a gas fireplace?
A fireplace damper is a small door inside a fireplace, usually near the base of the chimney. Typically made from cast iron or other heat-resistant metal (sometimes ceramic), the damper essentially opens and closes the chimney.
Is a damper and flue the same thing?
A damper is located in the flue of your chimney. The flue is where the smoke escapes when the fire is going. Dampers are placed inside of the flue to help control ventilation. Your damper should have a chain or handle that you can access in order to open and close it.
Where is the fireplace damper located?
Fireplace dampers are a type of damper usually located at the base of the chimney and around its throat just above the firebox. Flue dampers, which you can find at the base of a flue. Chimney cap dampers, which are typically located at the top of a chimney.
Does damper need to be open for gas fireplace?
Because gas-log fires produce copious amounts of carbon monoxide, they have to vent outside in a fail-safe manner. That’s why there is, or should be, a keep-open device attached to the damper in gas-log fireplaces.
Do all fireplaces have a damper?
Not all chimneys or flues have a damper. Open fireplaces can usually be found with damper located within the upper part of the firebox. It’s common to find a damper as part of an open fireplace, but in some cases there may be no damper at all.
