How do you get a light and fan switch on separate switches?

Quote from the video:
Quote from Youtube video: So so we we took we put one of the conductors to the light and one to the fan. And on the other side we have the hot wire and it's connected. By this connector here to this terminal.

How do you wire a ceiling fan with a light switch and two switches?





Quote from the video:
Quote from Youtube video: The light to the fan fixture. That is the blue wire up to my red wire. And then my neutral which is the white wire to the white wire and the green which is your ground to the copper wire.

How do you combine light and fan switches?

Connecting a Light and Fan to a New Switch



Connect the white wires together in the same way, then repeat with the ground wires. When you splice ground wires, you don’t have to cap them, but it’s still a good idea to do so because the cap helps keep them together. Mount the fan and light and move to the switch box.

Can two switches control one ceiling fan?

When connecting two fans to the same circuit and controlled by one set of switches, you simply connect the fans’ neutral wires, their ground wires and their hot wires in parallel.

How do you split a light switch into two?

3 Answers

  1. Get a 2-gang box to replace your existing 1-gang box.
  2. Get a new switch.
  3. Remove your existing box and install the 2-gang box in its place.
  4. Run your supply hot wire to both switches.
  5. Connect the light/fan hot wire to one switch and the exterior light to the other.
  6. Join all neutrals and ground wires.





How do I wire a fan with two switches?

Quote from the video:
Quote from Youtube video: Alternatively you can use what's called a pigtail just an extra wire coming out of the wire nut to connect to the other grounds or other wires.

What is the red wire when installing a ceiling fan?

A red wire up in the ceiling fan junction box usually indicates that the wiring has been installed which provides separate switch for the light and a separate switch for the fan motor. If your ceiling fan does not have a light fixture, then simply cap off the red wire and attach the fan motor to the black wire.

Can I connect red and black wires together?

These wires are typically used for switch wiring as well as the interconnection between smoke detectors hard-wired into the power system. You can link two red wires together, or you can link a red wire to a black wire. Since red wires conduct current, they are considered hot.

What does the red wire connect to on a ceiling fan?



Copper or green wire is the ground wire and keeps the fan from experience power surges. If there is a blue and black wire coming from the household circuit, there should be two switches on the wall. If there is a red wire coming from the ceiling, it is hooked up to the wall switch.

How do you wire a ceiling fan with a 3 way switch?

Quote from the video:
Quote from Youtube video: So black wire is gonna hook up to the top screw. From my fan and then my white wire and my red wire are going to be travelers. That go up and they connect together that lead to this other switch.

How do you wire a ceiling fan to one switch?

Quote from the video:
Quote from Youtube video: Here you would connect green to grounding white to white then connect both the fans black and blue wires to the houses black wire.

How many ceiling fans can you put on one switch?



There should be no problem running 4 ceiling fans on a single 15 ampere circuit, though it will depend on what else is on the circuit. Say a 52″ fan is 90-100 watts (at high speed), plus three 60 watt bulbs.

Can one switch control 2 circuits?

Double pole light switches, also known as a four-way switch, are two single pole switches put together. Two separate circuits are controlled by one switch. This is typically used to control a circuit from multiple locations in a series of three switches on one circuit.

Can one switch have two lights?

The answer is yes; one switch can turn on multiple lights. You can use two ways to make your switch control multiple lights. The most common way is to daisy-chain the light fixtures through connecting them with each other and hooking the first fixture to the switch.

How do I add a second light switch to an existing light?

Quote from the video:
Quote from Youtube video: And see where that goes then i'll draw drill an additional hole about an inch and a half behind this that will go up through the stud. And it will go into this bay.

How do I add a second light switch without wiring?



Quote from the video:
Quote from Youtube video: Slide the wall bracket into. Place. We'll put the plate over it to get our alignment. And then we'll slide the plate. Off. And mark the holes. Now we can put our drywall anchors in and mount.

How do you tap an existing wall switch?

Quote from the video:
Quote from Youtube video: You always want to grab a top and bottom loosen the screws. And then pull the switch all the way forward everything's been removed from the wall. And there's three screws on the switch.