Should worktops overhang?
20-30mm
We recommend that your measurements allow for a 20-30mm overhang at the front and exposed edges of your worktop, along with a 3-4mm gap between your worktop and wall (to leave room for sufficient expansion and contraction). This is particularly important to consider if worktops are to be joined together.
Are all kitchen worktops the same depth?
The average kitchen worktop depth typically lies between 600mm (60cm) and 650mm (65cm). It mostly varies depending on the size of the base cabinets. Having said this, having a depth of around 650mm can give you a lot more prep space.
Can you fit a worktop yourself?
Though you may be happy to install them, the downside of cutting and customising any worktops yourself is the costs involved in hiring or purchasing an appropriate saw, router and other necessary tools.
How do you join 22mm laminate worktops?
Quote from the video:
Quote from Youtube video: We put the kitchen countertop and template in the right position. Then we take the pins. And place them in the appropriate holes to ensure the correct position of the template.
How far should a kitchen counter overhang?
1½ inches
A standard countertop usually has an overhang of 1½ inches. Although some countertops may have a longer or shorter overhang, this number is generally the standard length for an overhang in homes. When utilizing an overhang for kitchen islands, the standard amount of overhang is typically 12 inches.
What is the standard overhang for a kitchen worktop?
A typical kitchen worktop is naturally fitted with a 2cm (0.75”) overhang for aesthetic purposes, when measuring from the front of the cabinet to the edge of the worktop.
How deep should a kitchen worktop be?
Typically, worktops are around 600mm – 650mm deep to accommodate base units.
How deep should kitchen countertops be?
25 ½ inches
Countertop depth standard measure is 25 ½ inches, though this varies based on appliance depths, room size, base cabinet size, and the backsplash details. Having a standard depth countertop helps maximize your space and enhances the look of your kitchen.
Are Thin worktops in fashion?
As the trend for contemporary style kitchens continues to grow in popularity, so do worktops with a thinner profile. Thin kitchen worktops are becoming the go-to choice for contemporary cooking spaces and with that in mind, we discuss our latest decors in this blog post.
How do you find the perfect worktop joint?
Quote from the video:
Quote from Youtube video: And keep the guide Bush pressed against the right-hand side of a slot. Don't try to deal too deep with a cut where you may snap the cutter.
How do you join thin laminate worktops?
Quote from the video:
Quote from Youtube video: Bring the joints together and tighten the toggle bolts using the three millimeter hex key taking care not to over tighten them quickly remove the excess top seal with the scraper.
How do you join worktops at right angles?
To fit Kitchen worktops together at right angles you need to cut male and female masons miter joints. These need to be cut with a special Trend worktop jig or similar and a router. A collett is fitted to the underside of the router base, that guides the cutter through precise grooves cut out of the jig.
How do you join a worktop at 90 degrees?
A butt joint is used to connect two worktops at a 90° angle and so are simpler and easier to join together compared to mason’s mitre joints. Three apertures are routed into the underside of the of the worktop to allow for connector bolts to be fitted and, when tightened, create a smooth finish.
How do you join two straight kitchen worktops?
Quote from the video:
Quote from Youtube video: The central bit between them in order to mark where they're going to join so just wanna come in a bit closer might be the cut that I've done.
How do you fit kitchen worktops together?
Quote from the video:
Quote from Youtube video: Place the strip with the flat surface against the cut edge and screw into place using the pre-drilled holes in the strip. This will make a neat and tidy. Join.
Do you glue kitchen worktops?
Worktop Adhesives
There are proprietary adhesives made for joining work tops. These adhesives come in a range of colours which can be mixed and matched to suit the worktop colour you have. If you have a reasonably tight join it is possible to use other adhesive products to mitre the worktop.
How do you seal worktop edges?
Quote from the video:
Quote from Youtube video: Once the worktop is properly installed. The join between the wall and the worktop itself will need to be sealed too on the top only with acrylic.
How do you join solid oak worktops?
When joining two worktops together, you should use three standard worktop bolts on each joint. Seal the end grain at both sides of the joint with an appropriate sealer such as MitreSeal before making the joint. Seal the joint with sealer when the parts are finally tightened.
Should I glue solid oak worktop?
No need for glue as the tops are solid right through. Use biscuits or spiked joiners. Then keep well oiled.
Do oak worktops expand?
As long as atmospheric conditions change, wood will contract and expand in accordance – but we can keep this to a minimum and prevent any issues with some simple installation and maintenance guidelines.
