How do you attach a foot to a clawfoot tub?
Quote from the video:
Quote from Youtube video: Slide a dovetail bolt into the mounting pod. Slide the foot down over the bolt thread. The flat washer locking washer and nut onto the bolt. And tighten the nut so you can adjust the foot as needed.
How do you attach a shower riser to a faucet?
Insert the lower riser pipe into the top of the tub faucet and secure it by tightening the riser nut. Apply a bit of thread sealant or plumber’s tape to the threads before tightening. Use an adjustable wrench to tighten firmly.
Can you turn a claw foot tub into a shower?
You need a Clawfoot tub fixture that has a diverter lever so you can switch between the tub and shower. When you first turn the water on, it will be coming out of the tub spout. To switch to the shower, you turn the diverter handle.
How do you install a clawfoot tub supply line?
Quote from the video:
Quote from Youtube video: To begin take a plumb line and sit on the edge of the tub. Centered. On the overflow. Where the plumb line hits the floor measure back towards the tub one and one-half inches.
Can you add feet to a cast iron tub?
If the tub feet do not sit flush on the floor, plastic shims may need to be added to the feet. To adjust the tub feet with plastic shims, remove the foot and install a plastic shim between the foot and the foot bolt. When the foot is aligned properly, secure it to the tub.
Can you weld cast iron tub feet?
Thanks for your help. If welding a cast iron tub is like welding any other type of cast iron, if not done properly will cause major problems with the tub. This is due to the properties of cast iron. It expands and contracts differently than steel.
How do you install a PEX shower faucet?
Quote from the video:
Quote from Youtube video: And we're going to convert from original copper over to PEX and we're going to show you all the tips and tricks so that when you go to put on your finishing trim it comes out flawless.
How do you replace a shower riser?
Simply unscrew with a screwdriver and remove from the wall. Slide your new shower head holder onto your new riser rail and fit the end section. Screw your new riser kit to the wall.
How do I install a new shower fixture?
Quote from the video:
Quote from Youtube video: Today we're going to install a supply elbow hose a showerhead and the valve trim cover here in our shower. The important thing to remember is you want to install the pieces to the wall.
How do you install a freestanding tub on a concrete slab?
Installing the Freestanding Tub on a Concrete Slab
- Step 1: Choosing the Right Place. …
- Step 2: Leveling the Floor. …
- Step 3: Attaching the Drain Tailpiece to The Tub. …
- Step 4: Placing the Bathtub Carefully. …
- Step 5: Screwing. …
- Step 6: Installing the Overflow Components. …
- Step 7: Testing the Tub.
How do you plumb a freestanding tap?
Quote from the video:
Quote from Youtube video: Next you assemble your base plate to the bottom of the faucet. This is your base plate. Put it in between both hoses and thread it to the top of the bottom of your faucet the lock nut until it's.
What is a claw foot?
Claw foot is a deformity of the foot. The joint of the toe that is closest to the ankle is bent upward, and the other joints are bent downward. The toe looks like a claw.
How do you fix a claw foot?
Exercise your toes: Stretch your toes out and pick up small objects with your toes. Wear sensible shoes: The best shoes if you’re prone to claw toes have good arch support, short heels and an extra wide toebox. Pumice stone: Use a pumice stone to file down your corns and calluses.
What is a claw toe look like?
A claw toe is a toe deformity which causes the toe to bend downwards in a claw-like shape. Along with hammer toes and bone spurs, claw toes are among the most common toe deformities. Most commonly, these affect the 2nd through 5th toes and often cause corns.
Are claw toes painful?
In some cases, claw foot doesn’t cause any pain. In other cases, your toes might hurt, and you might develop corns or calluses or ulcers on parts that rub against your shoes. Claw toes are sometimes mistakenly referred to as “hammer toes,” but they’re not the same thing.
Can claw toes be straightened?
Fixed (stiff) Claw Toe: there are two options for treatment. Joint resection can be used to treat the fixed hammer toe by making an incision over the top of the toe. Ligaments and tendons may be cut to help with straightening the toe.
How do you tape a claw toe?
Start with the tape under the toes, with the sticky side up. Gently wrap the tape under the big toe (or the toe next to the hammer toe), then over the hammer toe, and then under the next toe and over to the toe you started with. This forces the hammer toe into a normal position.
