If your small drill bit punches straight through the metal plate, then it’s most likely a corner bead. But if your small drill bit takes some time to drill through the metal plate, then it’s likely a nail plate and you should not be installing screws through it. Highly active question.

How do you hang curtains on metal?


Quote from Youtube video: Side of the rod. And this one with the little tabs in it goes on the narrower rod i did find that it's easier to put the ends and the rod.

Is it OK to drill into window frame?





The simple answer to whether you can drill holes in your uPVC window or door frames is yes. You can hang curtains or install window blinds that need to be fixed to your window frames using screw fittings.

Can I hammer in curtain rods?

Quote from the video:
Quote from Youtube video: When putting it up you want to take and put the bracket over top of your nail. Place the nail where you want it to go and start driving it in with your hammer.

What am I hitting behind drywall?

Studs are made of wood, and many times you actually want to hit them. Wood is soft, and if your drill goes into something behind the drywall without much pressure on your part, chances are, it’s a stud. If you remove your drill bit and see sawdust stuck to the bit, you almost certainly hit a stud. What is this?

How do you hang curtains with metal hooks?

Quote from the video:
Quote from Youtube video: I just put the pin in the position first and so just sort of push it.

How do you hang a curtain rod on a metal window?





Quote from the video:
Quote from Youtube video: Flip to the opposite side of the window to make the remaining marks install the screws. And place the hanger feed the curtain onto the rod. And then place it on the hooks. Twist on the finials.

Do you need special drill bits for metal?

No Fancy Drill Bits for Metal Required



Almost any general-purpose twist bit will do a decent job of drilling holes in metal. In fact, most drill bits for metal are manufactured to drill through a variety of materials, including wood and plastic.

What drill bit is for metal?

Cobalt drill bits are used for drilling hard metal and steel. They dissipate heat quickly and are highly resistant to abrasions, making them better for drilling into hard metals than black oxide- or titanium-coated drill bits.

Can you screw into an Aluminium window frame?

To use self-tapping screws, you may need to drill a pilot hole first and then place the screw directly on the aluminum sheet. Stabilize the screw so it doesn’t tilt as it goes in and twist the screw into the metal. Let it turn until it goes all the way through, as the threads and the sharp point make their own hole.

Why is there metal in my wall?



Metal Plates In Walls Are Intended to Stop Drills



So, as you’re probably aware, your wall hides some useful things, like pipes, electrical wires, and ductwork. Hitting any of these things when you drill into a wall would be bad. In order to prevent this from happening, metal plates typically cover up these things.

What would be metal behind drywall?

Plumbing pipes of PEX, copper, or galvanized steel are found behind walls mainly to serve kitchens and bathrooms. Pipes will run vertically more than horizontally through walls. A common example would be a blue PEX and a red PEX pipe running vertically up from the water heater and main water supply in the basement.

How do you know if something is behind a wall?

Quote from the video:
Quote from Youtube video: Work because it's advertised if you guys have ever seen this wallabot. It's advertised where you can see pipes you could see electrical.

Should I use plastic or metal curtain hooks?



As a general rule of thumb, the heavier the fabric, the heavier or sturdier the hook should be. If you’re using a heavy to mid-weight fabric, metal curtain hooks or brass curtain hooks will be the most suitable choice. If your fabric is lighter, something like cotton for instance, you could use plastic curtain hooks.

How do you use drapery pin hooks?

Drapery pins (figure A) are inserted into the back (lining side) of the panels. The sharp, pointed end goes into the fabric. Insert the straight end of the pin all the way until it looks like figure B. The curved end of the pin will go through the eyelet of your drapery ring or rod carrier.

How do you use drapery hooks with rings?

Quote from the video:
Quote from Youtube video: This ring is for use with a round curtain rod to use them you simply clip the clasp to the top of the curtain. Then slide the curtain rod through the ring.

How do you hang curtains on a metal french door?

Quote from the video:
Quote from Youtube video: So you're going to have to attach the drape at the top and the bottom so you're going to want to resize your drape to just larger than your opening possibly a half an inch to an inch on either side.

How do you hang curtains on an exterior door?



Insert a sash rod through the top pocket of your curtains. Hold the rod up to the door and extend or shorten it as needed by pulling or pushing on one end. The holes on the end of the sash rod should line up with the prong on the sash bracket. Slide the rod over the prong and clip it into position.

Can you put a curtain rod on a door?

You can attach door curtain panels as you would with any window curtain by using a single rod placed on top of the door.

Can I hang curtains without drilling holes?

Dowels and Sticky Hooks



And the beauty of using a sticky hook instead of drilling holes in the wall is that if you decide the curtains look too low or too high, you can move the rod and hooks without any damage.

How do you hang a curtain rod without drilling?

To hang curtains using a damage-free installation method, try one of these options:

  1. Secure the hardware with adhesive hooks. Adhesive hooks or adhesive strips are versatile hanging tools you can purchase in various sizes and strengths. …
  2. Use magnetic curtain rods. …
  3. Use tension rod curtains inside window frames.



How do you hang curtains professionally?

How To Hang a Curtain Like A Pro

  1. Hang them high. Especially in rooms with low ceilings, be sure to hang your curtain rod as high as possible. …
  2. Hang them wide. …
  3. Hang them in the right length. …
  4. Hang the right amount of panels. …
  5. Hang the right style of panel.


How do you hang curtains to look expensive?

Quote from the video:
Quote from Youtube video: So look closely and I'm gonna show you how to put these rings on and the way I place my rings. They will be easily spaced. So this is a quick tip it. Save it in your favorites folder.

How do you hang curtains to make a room look bigger?

When you hang your curtain rod higher than the window — almost to the ceiling — the window will look bigger, and the curtains themselves will look much more high-end. But hanging the curtain rod higher than the window requires curtains that are longer than your typical curtain.