How to Fix a Stripped Faucet Handle in 10 Minutes or Less

  • Turn the Water Off. The valves to turn the water off to your sink should be right below the faucet. …
  • Remove Faucet Handles or Cover Plates. …
  • Remove Locking Nut. …
  • Remove Faucet Cartridge. …
  • Replace the Faucet Cartridge.

How do you remove a stripped faucet cartridge?

Quote from Youtube video: Let that set up for a few minutes tap on it a little bit. Then you don't want to get a large pipe wrench I use like a 16 or 24 inch pipe wrench to back it up. Then I take my nip X pliers wrench.

How do you remove a stripped valve stem?

If it’s the stem that’s stripped, you’ll have to replace the entire valve. Turn off the water to the shower and unscrew the valve retaining the nut to remove the valve. If a Moen shower handle is stripped, you might have to pull out a retaining clip, using pliers, to get the valve out.

How do you fix a faucet handle that keeps turning?

It’s usually a result of wear and tear on the faucet stem, or cartridge.

How to Fix a Stripped Faucet Handle in 10 Minutes or Less

  1. Turn off the water (and cover the drain!) …
  2. Remove faucet handles or cover plates. …
  3. Remove locking nut. …
  4. Remove the faucet cartridge. …
  5. Replace and retrace.

How do you replace a single handle faucet cartridge?

Quote from the video:
Quote from Youtube video: First you will need to turn off the hot and cold water supply valve under the sink. Next you will need to remove the single lever handle. This may require using an allen wrench to loosen the handle.

How much does it cost to replace a faucet cartridge?

The cost to replace a shower cartridge is $100 to $350. A faucet cartridge costs $10 to $80, depending on the brand, material, and valve type. Plumbers charge $90 to $270 in labor to replace a shower cartridge.

Shower cartridge replacement cost.

National average cost $210
Average cost range $100 to $350

How do I remove a stuck or stripped faucet seat?

Grasp the blade of the screwdriver where it extends up from the hole with an adjustable wrench in one hand and the screwdriver handle in the other hand. Twist both hands sharply at the same time in a counterclockwise direction. Turn the faucet seat counterclockwise to thread it out of the body.

How do you remove a valve stem from a bathroom faucet?

Quote from the video:
Quote from Youtube video: If you have a brass stem you'll need to remove this by using a wrench and rotating it in the on direction until it threads out entirely.

How do you remove a shower handle with a stripped screw?


  1. Using your locking pliers try to position them so that you get a good grip of the screw. If you can’t get a good grip then you wont be able to get the best results possible and should probably try another method.
  2. Once you have a good grip, twist and pull on the stripped screw to try and gain some movement.

Can a faucet cartridge be repaired?

Worn cartridges or rubber O rings often lead to leaks. By swapping in replacement parts, your faucet won’t leak at the base or around the handles anymore. Replacing a faucet cartridge is a plumbing fix you can do in less than an hour. All you need is a few simple tools.

How do you take apart a single handle faucet?

Quote from the video:
Quote from Youtube video: This may require using an Allen wrench to loosen the handle. There may be a button that covers the screw that needs to be removed first and then you can loosen the screw and remove the lever handle.

How do I identify my faucet cartridge?

Easiest of all is when it says the brand name right on the faucet face. But you should also look at the bottom of the faucet, on the handles or on the round plate behind the handles. If you find a brand name, go to the manufacturer’s website and call the contact number for assistance.

Are hot and cold faucet cartridges different?

A hot cartridge opens or turns on the water by moving in the counter-clockwise direction. A cold cartridge opens or turns on the water by moving in the clockwise direction.

Are faucet cartridges interchangeable?

Cartridges aren’t interchangeable among different faucets, so if you decide you need a replacement, you need to know its part number so you can order it from your plumbing supplier or online. That number is usually available on the manufacturer’s website in the online version of the owner’s manual for your faucet.

How do I replace a faucet cartridge?

Quote from the video:
Quote from Youtube video: Use a crescent wrench to remove the bonnet nut from the cartridge. Once the nut is off remove the cartridge if you need extra leverage. Use the pliers to pull on the stem.

How do you remove faucet handles?

Style-1: Button or Capped Style Faucet Handle [5 Steps]

  1. Step 1: Locate the Cap or Button. Locate the cap or button around the faucet handle. …
  2. Step 2: Use a Flat Screwdriver to Pop out the Button or Cap. …
  3. Step 3: Turn Off the Water Supply. …
  4. Step 4: Remove the Hidden Screw. …
  5. Step 5: Pull the Handle.

How do you fix a bathroom faucet handle?

Quote from the video:
Quote from Youtube video: First shut the water off by turning the handle. Clockwise. It's always good though to check to make sure you turned off the right water source oh yeah and don't use the other handle.