Can two fireplaces share the same chimney?

Fireplaces on multiple levels can also share one chimney structure. Since the fireplaces are on different stories of the home, the chimney extends from the lowest floor through the roof. Each fireplace can face the same direction, if you want, since they will not block each other.

Can a fireplace be added to an existing chimney?





Yes, you can easily add a gas fireplace insert into your existing chimney. In fact, a fireplace insert is an appliance designed to fit into an existing fireplace. Inserts are usually cut in various sizes to suit your preferences and needs.

Can a fireplace be added?

Be assured that it is possible to add a fireplace to an existing home. You’ll just need to determine which one will work best. Get familiar with your area’s building codes to check requirements such as minimum clearances around vent pipes and limits on fireplace emissions.

Can you install a fireplace with no chimney?

Yes, it is possible to add a wood burning stove or a fireplace without an existing chimney, but you do need to install a chimney in the process. All wood burning fireplaces have to have a way to allow smoke and dangerous gases to exit your home.

Can 2 wood stoves share a chimney?

Combination Wood / Oil Fired Appliances on Same Floor May Share a Common Flue. A wood-fired heating appliance may be vented into the same chimney flue as an oil-fired heating appliance provided that they are on the same floor – in some jurisdictions.

Can you vent a wood stove into a chimney?





Stoves can be added to a fireplace in several ways. Free-standing stoves can be installed so that the stove pipe enters into the fireplace chimney above the damper, through the damper or into the firebox below the damper. Properly designed stoves can also be inserted into the fireplace opening. Above the Damper.

How much does it cost to add a fireplace and chimney?

A fireplace and chimney install costs $2,500 to $11,000, or $6,750 on average. Replacing the cap, liner and other repairs range from $350 to $2,150. Expect to pay up to $1,000 per year for inspection and cleaning services depending on the condition of your chimney and its total number of flues.

How hard is it to add a fireplace to an existing home?

Modern fireplaces – both wood-burning and gas-fueled – are much easier to install than building a traditional masonry unit. Fireplace inserts are even easier, because they’re pre-built from the factory and require only an opening to fit in to.

Can you put a fireplace in a house that doesn’t have one?

If your home doesn’t have a fireplace, that’s OK: With careful planning, you can add one. As you begin your research, the first thing to know is that fireplaces generally fall into one of three categories: masonry, zero-clearance (also known as pre-fabricated or manufactured), and gas.

Can you have a wood fireplace with no chimney?



If you live in a house without a chimney, you may be wondering whether it is possible to have a wood burning or pellet stove. Fortunately for many, the answer is a resounding yes! Luckily for those living in modern homes, you do not need a chimney to install a wood burning or pellet stove.

How do you vent a wood burning fireplace without a chimney?

The secret to installing a wood burner without a chimney is a dual wall flue system. Simply said, it is a network of interconnected stainless steel pipes that can transport stove fumes outdoors.

Do I need planning permission to install a fireplace?

As long as the building isn’t listed you will not need planning permission to reopen the fireplace. However, if you are installing anything that has the potential to cause fire or toxic fumes it will need to comply with Building Regulations for combustion appliances.

How many wood burning fireplaces can share a single flue?



You can tell whether a chimney is lined by looking for a liner extending above the top. True or False? Generally speaking, how far should wood framing members be kept away from masonry chimneys? Two wood burning fireplaces can share a single flue as long as they are on the same floor level.

How do stacked chimneys work?

There’s actually a little bit of science behind this called the stack effect. The stack effect essentially works the same as a hot air balloon does. Hot air rises, so when air is heated by the combustion of the fireplace, the smoke and gasses will naturally rise up and be replaced by cooler air to keep the cycle going.

Can you share chimney flue?

Shared Chimney & Shared Flue Hazards
A single chimney can safely have multiple flues inside the chimney, each flue venting an appliance, fireplace, or other device, provided that the chimney was properly constructed, including the necessary spacing or sealant between the individual flues.

Do you need Neighbours permission to remove chimney breast?

If the chimney breast is attached to a wall between your home and another building you’ll need to serve a Party Wall Notice on your neighbour before work can commence. Any gas, plumbing or electrical appliances and services need to be isolated and changed/removed before you begin.

What existing chimney style are you prohibited connecting a appliance to?



801.10.
An appliance shall not be connected to a flue serving a factory-built fireplace unless the appliance is specifically listed for such installation.

Do you need a party wall agreement to remove a chimney stack?

Removing a chimney breast is fine if you are taking it out all the way through, right up to the chimney stack, if they have only removed it on one level (say downstairs) then they would have to put steels in to take the weight of the chimney stack above, so then they would need party wall agreement.

What is the difference between a party wall and a boundary wall?

A boundary wall will normally be built with all of its piers on one side only of the wall, so as to keep the whole of the wall on its owner’s land. A party fence wall may have its piers protruding from both sides of the wall.

Are chimney breasts load bearing?

When you take out a chimney breast, you are also removing an important load-bearing wall. Because of this, you will need to ensure the structural integrity of your building isn’t put at risk – which means you need expert guidance and approval from your council to be certain the job is done safely.