What if new sink drain doesn’t line up with existing pipes?
In general, if the P-trap doesn’t line up with the drain, you can adjust the length and height of your drainpipes by cutting them or simply slipping them in and out of their fittings.
How do you fix a misaligned P-trap?
Quote from the video:
Quote from Youtube video: You cut it to length such that it fits right at the bottom here that's where it fits in that. Cut out there that's where it ends it terminates right there.
How do you reroute a sink drain pipe?
Quote from the video:
Quote from Youtube video: A one-and-a-half inch abs trap and it's got a little sink pop-up assembly here usually you can loosen that little nut right there take out the stopper.
How do you reattach a drain trap?
Quote from the video:
Quote from Youtube video: To do this first attach the fitting with slip washers and nuts. Then apply pipe lubricant on the slip washer to ensure a tighter. Fit. Now it's time to attach the trap arm to the drain stub.
How do you connect misaligned PVC pipe?
Quote from the video:
Quote from Youtube video: Area. Once it's good and warm I'm gonna gently test the pipe to see if it bends easily slowly Bend it the angle I want how many heat it a bit just to ensure it bends well.
Can sink drain be offset?
Quote from the video:
Quote from Youtube video: It's all about space economy opposite drains are typically not the first thing that come to mind when purchasing a sink there are many benefits to having the drain offset from the center.
Does P-trap have to be directly below sink drain?
You attach the p-trap directly to the drainage and manuever the p-traps exits into you existing drain. It is not ideal to have the p-trap below the the exit drain because water gravity has to force the water out instead of it flowing downwards naturally. They both work and have seen it many times.
Why is my new P-trap leaking?
When a P-trap leak occurs, it’s usually because the nuts aren’t tight enough, the pipes are misaligned or a P-trap washer isn’t seated correctly.
Are all P-traps the same length?
Choosing the Right P-Trap
Kitchen sink P-Traps come in 1-1/2” standard size, while bathroom sinks use P-Traps of 1-1/4” standard size. The traps also come in different material types such as propylene, ABS, brass (chrome-plated or natural), and PVC.
How do you connect a tailpiece to a sink drain?
Quote from the video:
Quote from Youtube video: But then you get your drain pipe into place tighten the top one up a little bit. See where the bottom one is kind of fitting in here get that into place type that up a little bit.
What is a trap adapter?
PVC Threaded Trap Adapter to connect your sink drainage to the drain pipe that extends through the wall or floor. Designed to fit most tubular drain applications, this universal adapter is constructed from PVC plastic.
How do you replace a basin trap?
Quote from the video:
Quote from Youtube video: If you're basing drainage is slow it may be necessary to replace your base in waste trap. Start by unscrewing the nuts connecting the truck to the base in waste and also to the waste pipe. Taking care
How do you align pipe fittings?
Pull off the fitting and spread a coat of primer onto the pipe end and around the inside of the fitting. Follow up with a coat of solvent cement. Immediately push the fitting back onto the pipe and twist it a quarter turn until the two lines match up.
How do you line up plumbing pipes?
Quote from the video:
Quote from Youtube video: So you can raise or lower it if needed to gain the correct slope. And dry fit the p-trap on the drain. Now use the measuring tape to measure the length of the pipe that will fit between the p-trap.
How do you fix a small gap with PVC pipe?
Using repair epoxy is an option for fixing small holes. It’s usually a two-part epoxy that you mix right before applying. The PVC pipe needs to be completely dry before you apply the epoxy. Allow it to cure according to the package instructions, which can take around an hour; then test the pipe for leaks.
How do you splice existing PVC pipe?
Quote from the video:
Quote from Youtube video: For this job we'll be using a battery-powered saw our glue and primer and a marker so if you're wanting to tie in with a tea to your pipes. You'll take the tea. Place it over the pipe.
Can PVC be unglued?
You can’t unglue PVC fittings or couplings joined with primer and solvent cement because it actually creates a solvent weld. The primer and solvent cement create a chemical reaction when combined on the PVC that essentially melts the two PVC pieces together.
How do you connect PVC to tight spaces?
Quote from the video:
Quote from Youtube video: Using a slip fix fitting it's cheap and easy and strong takes a high pressure.
How do you install a PVC slip coupler?
Quote from the video:
Quote from Youtube video: This pipe will be inserted into the end of the branch. And follow that down and that's where we need to cut the pipe. Okay. So these are our two marks indicating the section of pipe we're removing.
How do you install a PVC slip union?
Quote from the video:
Quote from Youtube video: Now cement on the pipe cuts. And then the tail pieces. Slide them on order turn to make a good seal. Now let's put everything. Together.
