The best way to cut a 4×4 post is by using a 12-inch miter saw, 10-inch radial arm saw, both of which can cut completely through a post in one pass, or a standard circular saw that can make precise cuts in two passes with the help of a simple jig.

How do you cut an upright post?

Quote from the video:
Quote from Youtube video: Saw the edge fence here is going to ride. It's going to ride like this. Now the other solution is to use a chain saw and it gets really choppy. This is what it looks like after.

Can you cut a 4×4 with a Sawzall?





Quote from the video:
Quote from Youtube video: Just going to repossession the piece of wood. And I will just make my way through complete the. Clutch. All right so as you can see I have cut the four by four timber with the reciprocating saw and it

Can a jigsaw cut a 4×4?

Jigsaws work best for cutting softwood that’s no more than 1-1/2 in. thick and hardwood up to 3/4 in. thick. In short, a jigsaw can cut a 2×4 comfortably, however cutting a 4×4 would not be ideal.

How do you cut Decorative post tops?

Quote from the video:
Quote from Youtube video: It's easy to do with a radial arm saw set the blade at a 45-degree angle before cutting always protect your eyes with safety goggles. Then make one cut pulling the saw firmly.

How do you cut a 4×4 post straight?

The best way to cut a 4×4 post is by using a 12-inch miter saw, 10-inch radial arm saw, both of which can cut completely through a post in one pass, or a standard circular saw that can make precise cuts in two passes with the help of a simple jig.

How do you cut a 4×4 with a miter saw?





Cutting the 4×4

  1. Start your saw while the head is in its upright resting position. Bring it down slowly towards the mark, while firmly pushing down on the side of the 4×4 to give it more stability.
  2. By pushing the blade slowly into the wood, you’re minimizing the risk of a kickback.


How do you cut a 4×4 piece of wood?

Cutting a 4×4 with a Circular Saw – Guide

  1. Step 1: Mark Cut Line. The first step is to measure and mark your cut line onto the 4×4. …
  2. Step 2: Make the First Cut. First, make sure your circular saw is adjusted to the maximum cutting depth. …
  3. Step 2: Rotate the 4×4 and Make the Second Cut. …
  4. Step 3: Rotate 90° and Make Third Cut.


Can you cut a 4×4 with a hand saw?



Quote from the video:
Quote from Youtube video: Now using a handsaw isn't the fastest way to cut a four by four. But it does leave a pretty smooth edge.

What is the difference between a Sawzall and a reciprocating saw?

sawzall, and what the difference is between the two. They are actually the same thing. The Milwaukee tool company introduced the first reciprocating saw in 1951, and called it the Sawzall. It has since been so widely copied that the terms reciprocating saw and sawzall are now used interchangeably.

How do you cut the top of a wooden fence post?

Quote from the video:
Quote from Youtube video: Now you want to make a mark that's about an inch down just draw a line straight across. And then measure two inches down from that. And just make a little line.

How do you notch timber posts?



Quote from the video:
Quote from Youtube video: And a chisel to finish this thing up. Now I'm going to use a sawzall to cut out this bit of wood right here all the way down to this cut you need to make sure and get it on both sides.

How do you cut straight poles?

Quote from the video:
Quote from Youtube video: It's tight it'll repeat the processing process down at the other end. So I'm securing the clamp down at the other end. And I've done that it's nice and secure. Now we're ready to cut the wood.

How do you cut a straight edge without a table saw?

Quote from the video:
Quote from Youtube video: Wood. Next fit your circular saw with an edge guide like this one right here it slides along the edge of the lumber. Giving you a uniform cut from one end to the next.

How can I cut wood at home without a saw?

In fact, as long as you have some common tools like an axe, a drill, or a chisel nearby, you can make a serviceable cut in a piece of wood without any saw at all. However, there’s no denying that a saw is still the best, most suitable tool for any wood-cutting job.

Can I use chainsaw to cut wood?



Yes, you can use a chainsaw to cut wet wood.

How much does a Stihl 881 cost?

$2,179.99. The largest and most powerful chainsaw in the STIHL lineup. For the largest, toughest and most demanding jobs, professionals can find the performance they need in the MS 881 chainsaw.

What does full chisel chain mean?

A full chisel chain is designed for the fast cutting action. In comparison to the semi-chisel chain, this chain has square-cornered teeth which makes it more aggressive when cutting.

Does cutting wet wood dull a chainsaw?

Can you cut wet wood with a chainsaw? Yes, you can cut the wet wood with a chainsaw. Besides, there is a misconception that wet wood can impact the chainsaw bar and chain. But actually, the damp wood will not dull the chainsaw any faster than using it on other types of wood.

How often should you flip the bar on a chainsaw?



Some professional loggers would advocate that you should flip your chainsaw bar at the end of every use, particularly when you are cleaning up. Others suggest a more relaxed approach advising that you flip the chainsaw bar only when you are changing your chainsaw blade.

Do you flip the bar on a chainsaw?

Every chainsaw bar has been designed to be mounted right-side up or upside down. The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear.