Blue/white(with blue stripe) is normally the “line 1” pair in cat 5 cable used for phones. Green/white(with green stripe) is the standard line 2 pair, in the presently unusual case that you actually have 2 land-lines. Pins 4&5 for blue, 3&6 for green, on an 8-pin RJ-45.
How do I know if my cable is Ethernet or phone?
Ethernet and telephone cables look fairly similar and it is not uncommon to get the two mixed up. The key difference between the two is the size of the plastic connectors on the ends of the cable. Telephones use an RJ11/RJ12 connector whereas Ethernet uses RJ45. RJ11/RJ12 only uses 4-6 pins whereas RJ45 uses 8 pins.
Is CAT5 an Ethernet or phone?
Cat5 cables offer high-transfer speeds at a low cost and can transfer up to four signals at once. Technically, Cat5 cables can support Gigabit Ethernet, too. These cables are versatile, and can be used in a variety of applications, from networking to telephone wiring.
How do I know which Ethernet cable I have?
To identify the Ethernet cable, pay attention to its sheath. There you will find information about the category, marked as Cat, and the number next to it. Labels you should see are CAT5, CAT5E, CAT6, CAT6E, CAT7. A higher number means faster speeds supported.
How can I tell what CAT5 cable I have?
Easiest way to tell cat5 and cat 5e apart is to look at the number of twists in the green pair. If the green pair has the same number of twists as the orange and blue pairs, then it’s cat5e, if it has the same number of twists as the brown pair, then it’s cat5.
Is CAT5 a telephone wire?
CAT5 cable has four separate twisted pairs. Use the two wires in one of those pairs for your telephone connection. 10/100 base T Ethernet uses the green and orange pairs, specifically so that you can still use the blue and brown pairs for telephones.
Can you run Ethernet through a phone line?
Phone jacks are a little bit smaller than an ethernet port; this shape helps identify the right jack quickly; because ethernet ports are a little bit wider, it’s impossible to plug an ethernet cable in a phone jack; it helps you to plug in the right cable in the right jack.
What’s the difference between Cat5 and Cat5e?
The difference between Cat5 and Cat5e is that the Cat5e has a higher throughput speed of 1,000 Mbit / s. Also called Gbit / s. This is 10 times faster than the throughput speed of a Cat5 cable. When in doubt about either choosing a Cat5 or Cat5e cable, we can advise you to go for the Cat5e cable.
How do I know if my cable is Cat5 or 5e?
PHYSICAL DIFFERENCES
One of the interesting things about Cat5 and Cat5e is that they are virtually identical in their physical appearance. You cannot tell them apart based on thickness, color, or the material used. The only way to identify them is to look at the text that is printed on the cable and see for yourself.
How do I know if my Ethernet cable is Cat5 or Cat6?
Cat5e cable are just a four pair cable set enclosed in a jacket whereas Cat6 cables have a internal separator that isolate pair from one another. here’s a look. Cat5e cable are just a four pair cable set enclosed in a jacket whereas Cat6 cables have a internal separator that isolate pair from one another.
How do I know if my Ethernet cable is stranded or solid?
If there’s one piece of relatively thick copper = solid. A bunch of hair-like strands (ha!), it’s stranded… Stranded cable is much more flexible, which is why it’s used in the first place…
What is the difference between solid and stranded wire?
The physical differences between the two wires are straight forward enough: a solid wire consists of a solid metal core while stranded wires are made of a quantity of thinner wires that are twisted together into an organized bundle.
Is CAT5e solid or stranded?
Category 5e (CAT5e) and Category 6 (CAT6) network cables come in stranded conductor and solid conductor formats. A solid conductor uses one solid wire per conductor, meaning, in a standard CAT5e / CAT6 4-pair (8-conductor) roll, there would be a total of 8 solid wires.
What is the difference between a solid core and a stranded core CAT5e cable?
The key physical difference between a stranded cable and a solid cable is flexibility. Stranded cables are much more flexible and can withstand more bending compare to rigid solid conductors that can fail if flexed too many times. And the more strands a conductor has, the greater the flexibility.
Can I use stranded wire with solid wire?
It is possible to mix a solid and a stranded wire but that does not necessarily mean that you should do it. Connecting a solid copper wire to a stranded wire is a relatively complex process. There is a significant chance that something may go wrong.
Does stranded wire carry more current?
Current Carrying Capacity of Solid & Stranded Wire
If the diameter of both wires are the same, the solid wire will carry more current than the stranded wire. This is because the cross sectional area of the solid wire is bigger than the stranded wire as there is air-gap between the strands of the conductor in it.
