3 Answers
- replace that switch with a single-pole switch.
- connect either of the “traveler” wires to the load side.
- remove the other (unwanted) switch and connect the traveler wire used in step-2 to the “switched hot” wire that goes to the lights.
- the unused “traveler” wire is abandoned.
Can I remove one three way switch?
Remove the Three-Way Switch From the Circuit
Start with the three-way switch that will be removed. Remove the switch cover plate screws with the slot screw driver, and then remove the two switch screws. Carefully pull out the switch, making sure not to touch or short any of the three wires.
How do you eliminate a 3-way switch and make it a single pole?
To convert a 3-way switch to single pole, one of the traveler wires is removed from the switch. In order for a 3-way switch to function as a single pole, the wires need to be connected to the common and one of the traveler terminals. It will not work if the wires are connected to the two traveler terminals.
How do you remove a switch from a circuit?
Quote from Youtube video: Into these little slots one right there underneath that hole and one right there underneath that hole just insert a small flathead. And press into those slots.
How do you wire a single pole switch to a 3-way switch?
Quote from the video:
Quote from Youtube video: So when we connect this together these two pigtails are hot all the time we run one of these hot wires to the common terminal the black common terminal of the three-way switch.
How do you split a three way switch?
Quote from the video:
Quote from Youtube video: Second. All right so once you have both of these three-way switches removed it is time to grab your single pull switch. And time to install. It.
Do both switches need to be 3 way?
The key ingredient is a special type of switch called a “three-way” switch. You’ll need two of them, one to replace the existing switch and another for the new switch location. With these, you’ll have the convenience of turning a light on and off from two spots.
How do you cap a light switch?
Quote from the video:
Quote from Youtube video: For this job you will need some wire nuts and electrical tape so here's a standard electrical box this sits in between two studs.
What is the common wire in a 3-way switch?
Black wire
Black wire: This is a hot wire that carries electricity from the power source to the first switch in a typical 3-way setup. It’s also called the “common wire” or the “line wire.” Unless the breaker is off, this black wire is always hot.
How are 3-way switches wired?
Three-way wire(which includes red, black and white wires) runs from the switch on the left to the switch on the right, with the white wire carrying ground and the red and black wires carrying the output from terminals in the left switch. Normal sheathed cable runs from the right switch to the light.
Can you wire a 3-way switch with 2 wires?
Question: Can I use a 3-way switch with just two wires? Answer: No. There must be three wires between the two switches. You CAN use the switch with only two wires, but it will act as a regular switch, not a three-way switch.
What happens if you wire a 3 way switch wrong?
If you don’t correctly connect this wire, then your lights won’t work from more than one switch. Grounding the switch: You’ll also need to locate the ground wire and connect it to the switch too.
Can I take power from a light switch?
Switch boxes can sometimes be used as a power source for a new outlet, but only if the box is large enough and has neutral and ground wires running through it.
How do you split a power switch?
Quote from the video:
Quote from Youtube video: Together i screw them together or twist them together with clients pliers then i take a wire nut make them nice secure. So now the neutrals are all connected.
How do you make an outlet light switch independent?
Quote from the video:
Quote from Youtube video: This is an old work electricians box I'm going to use this box to install the new ballot. If you find the height raise an electricians hammer.
