How do you decommission a ceiling light?

Quote from the video:
Quote from Youtube video: Most commonly for this job you'll be using a battery power drill with a Philips tip bit first thing you want to do is identify.

How do you remove old can lights without attic access?





Quote from the video:
Quote from Youtube video: It just depends on how much room you have up in the joists. Once the can is dropped down you can access the j box of the can from below just open it up and now you can remove the wires.

How do I permanently remove a light fixture?

How to Cap Off a Light Fixture

  1. Turn off the power to the fixture at the fuse box. …
  2. Snip the wires with wire cutters, freeing the fixture completely and leaving the wires hanging out of the box.
  3. Strip off about ΒΌ inch of insulation from the end of each of the wires, using your wire cutters.

How do you remove and install a new light fixture from the ceiling?

How to replace a ceiling light fixture in 8 simple steps

  1. Step 1: Remove The Old Fixture. …
  2. Step 2: Detach The Wires. …
  3. Step 3: Detach The Strap. …
  4. Step 4: Strip The Wires. …
  5. Step 5: Connect With Wire Nuts. …
  6. Step 6: Secure The Connections. …
  7. Step 7: Install The Fixture. …
  8. Step 8: Install The Bulbs And Globe.


How do you change a ceiling light fixture?





Instructions

  1. Remove the Old Light Fixture. Remove the fixture shade or globe. …
  2. Test for Power and Disconnect the Wires. …
  3. Prepare the New Ceiling Fixture. …
  4. Install the Mounting Strap. …
  5. Inspect the Circuit Wires. …
  6. Connect the Ground Wires. …
  7. Connect the Neutral and Hot Wires. …
  8. Mount the Fixture Base.

How do I install ceiling lights without wires?

How to Get Overhead Lighting Without Wiring

  1. Use Plug In fixtures For Overhead Light. If you have an outlet and you can screw a hook into your ceiling, you can have a chandelier or a pendant light anywhere. …
  2. Large Arc Floor Lamp. …
  3. Torchiere Lamps Can Light Up a Room. …
  4. Use String Lighting. …
  5. Check Wattage On Your Fixture.


How do you install pendant lights without attic access?

Quote from the video:
Quote from Youtube video: You're gonna need a long bit like this to get up in there like this. And drill a hole through the joist when you do that make sure you leave at least two inches above the bottom of the floor joists.