How do you move a water supply line?

Quote from the video:
You don't know why they ran it that way but I want to run the hot water in the same space is the cold water so I have to cut this pipe off here I'm gonna use it a little pipe cutter ëthey here.

How do I move pipes under sink?





Quote from the video:
The new kitchen layer right we're going to use the existing plumbing. Now if you're not moving your sink to a new location.

How can I hide the pipes behind pedestal sink?

How To Hide Pipes Behind A Bathroom Sink [7 Great Methods]

  1. Install a cabinet.
  2. Hide pipes with a storage bin.
  3. Construct a small shelf.
  4. Add a few potted plants to the decor.
  5. Build a mini wall-cover.
  6. Install a sink skirt.
  7. Install pipe coverings.


How do you move a PVC drain pipe?

Quote from the video:
I used a oscillating tool to cut it it's fairly good make sure to clean up any plastic that's gonna hook hairs.

How hard is it to move a water line?





Moving kitchen plumbing is very difficult if your house is on a slab foundation. Water pipes can often be rerouted through walls or ceilings, especially if you use flexible PEX pipe. However, because the drain needs to have pitch and be lower than the fixture, it requires cutting and jack hammering through the slab.

How do I move a bathroom sink to another wall?

How to Move a Bathroom Sink

  1. Step 1: Do your homework. …
  2. Step 2: Turn off water. …
  3. Step 3: Detach your bathroom sink from its position. …
  4. Step 4: Close the fixtures and remove the sink. …
  5. Step 5: Set the plumbing fixtures and the drainage on the new location. …
  6. Step 6: Install the sink in your new location.

Can sink plumbing be moved?

Moving the sink is almost always possible. The only problem with moving it is how the sink drain is vented. A drain must have a vent so that the water can move freely. Moving the drain and/or the water is very simple in most cases.

How do you move plumbing in a bathroom sink?

Quote from the video:
Because most of the scenarios. That you're going to run into can be solved. By simply rotating. This piece and moving this piece in and out.

How do you reroute a drain pipe?



Quote from the video:
I'm just gonna run it straight into the side of the septic tank over here to drill through the side of the tank with the shipping hammer to do this. And then we're gonna cut off the old pipe.

Can you move a plumbing vent pipe?

The fast answer for Suzanne is the vent pipes can be moved. I can say this with a considerable amount of authority, as I’ve been a master plumber since age 29.

How do you run PVC pipe in a wall?

  1. Measure every 24 inches up the length of the PVC pipe. …
  2. Drill through both hole marks for each clamp placement.
  3. Place one wall anchor in each drilled hole. …
  4. Place the PVC conduit clamp over the holes and drive one 1 1/2-inch screw through each hole. …
  5. Locate the wall studs along the location of the PVC pipe.

    6. How do I run plumbing through walls?

    1. Step 1: Assess and Remove the Wall. If you need to run a new stack, assess your framing. …
    2. Step 2: Prep for New Pipe. Cut a hole with some wiggle room for the new pipe. …
    3. Step 3: Assemble and Place Drainpipe. Assemble the approved fittings onto the top of the drainpipe. …
    4. Step 4: Run the Vent. …
    5. Step 5: Guide and Attach Pipes.

      6. How do you secure a pipe to the wall?

      Quote from the video:
      Now you notice that I pre-drilled this block and so it doesn't split. Now with these copper clips we'll just secure the pipe to the blocking.

      How do you cover water pipes on the wall?



      You can purchase a wooden or plastic cover for your pipes at a hardware store to match your decor. Spray some adhesive spray over your pipe and wrap your covering around it completely. Cut off any excess with a box cutter or a utility knife to make your pipe look like a decoration.

      How do you cover exposed kitchen pipes?

      If you want to hide your pipes, the best option is to use a paint color that matches the hue of your kitchen walls or ceiling.

      1. In essence, you’ll be hiding the pipes in plain sight. …
      2. Alternatively, you can make your pipes look like part of the décor by painting them in a fresh color that stands out.


      What are pipe sleeves?

      Pipe sleeves are a metal covering that fit over your copper pipes that comes out of the floor and go into your radiator. They’re a fantastic way of supercharging your radiator valves and making them look even more stylish.

      How do you hide bathroom plumbing pipes?



      How to Hide Plumbing Pipes in your Bathroom

      1. Bathroom furniture. Bathroom furniture such as vanity units and cistern units, provide a simple yet effective way to hide the plumbing pipes in your bathroom. …
      2. Choose a pedestal basin. …
      3. Conceal pipes in the wall. …
      4. Fit a wall hung toilet. …
      5. Build a fake wall.


      How do you cover exposed pipes under a bathroom sink?

      Ideas For Hiding Pipes In Bathroom

      1. Get A Cabinet Installed.
      2. Use A Storage Bin To Hide Your Pipes.
      3. Install A Small Shelf Under The Sink.
      4. Embellish The Area With Some Potted Plants.
      5. Build A Faux-Sink Cabinet.
      6. Get A Sink-Skirt Installed.
      7. Cover Your Pipes With Pipe Coverings.
      8. Pedestal Sink.


      Related:

      1. New kitchen sink – not draining properly – could it be the way plumber connected pipes?
      2. Is this an ok construction for a bathroom sink drain?
      3. How do I reroute my existing bathroom piping for a pedestal sink?
      4. If I move my sink, how should I route the vent?
      5. Repair the overflow drain under a Corian sink where the tube and box has come unglued