What is the easiest way to remove a sink drain?
Quote from Youtube video: This little metal clip and push away and that will release it next loosen this nut. And pull out this run. Now this piece will unscrew. Completely. This nut will come off.
Can you unscrew the sink drain?
Remove Sink Stopper
Now that the horizontal rod and pivot nut have been removed, you should be able to remove the sink stopper by hand. Simply pull it out. The stopper may be covered in build up and gunk, so while it’s out, definitely clean it thoroughly.
How do you remove a sink drain pipe?
Locate the large nut connecting the trap to the straight section of pipe that extends down from the sink, called the tailpiece. Turn it counterclockwise to unscrew it. If it’s plastic, you can often do this by hand; if it is metal or difficult to turn, use a pipe wrench or adjustable pliers.
How do you remove a non removable sink stopper?
In this case, you can sometimes skip removing the stopper altogether.
- Place a bucket under the P-trap.
- Unscrew the connectors on each end of the P-trap. Use pliers if they’re tight.
- Pull out the P-trap and look for clogs. …
- Check the P-trap itself for clogs. …
- Reassemble the P-trap and sink stopper if applicable.
How do I disassemble a kitchen sink drain?
How to Remove a Kitchen Sink Drain
- Step 1: Shut Off Water Supply. …
- Step 2: Loosen the Drainpipes from the Drain’s Tailpiece. …
- Step 3: Disconnect the Tailpiece. …
- Step 4: Unfasten the Sink Drain Lock Nut. …
- Step 5: Make use of Penetrating Oil. …
- Step 6: Remove the Basket Strainer. …
- Step 7: Clean the Hole left by the Old Drain Strainer.
How do you loosen PVC pipe under sink?
Quote from the video:
Quote from Youtube video: So you want to grip it just enough that you have a hold on it. Then I take my pair of pliers. And I'll grip the other one and just give it a little twist. And they should come right apart.
How do you remove glued PVC pipe without special tools?
Quote from the video:
Quote from Youtube video: There's also important to use a steel hole soft sand steel holds the heat very well. Okay after the time is up remove the hole saw. And use some needle nose pliers to pull out the softened pipe.
How do you get a stuck PVC pipe apart?
Quote from the video:
Quote from Youtube video: Long pieces kind of like this you're going to want to hold it by its lowermost. Point to get the ultimate leverage and then you're just going to wiggle it back and forth.
