How do you replace bathroom pipes?
Youtube quote:And you can see how rusted it is this is really falling apart over time and we're going to replace it with plastic. And this will last for decades. So replace this J Bend and the wall tube.
How do you unscrew water pipes?
Squeeze a pair of pliers or adjustable wrenches onto the pipe, placing one on each side of the joint. Keep your tools as close to the joint as possible. Hold one of the wrenches still while you twist the other one to unscrew it. If that fails, you can try turning both wrenches in opposite directions at the same time.
How do you remove old metal water pipes?
Youtube quote:After he gets completely hot grab your pipe wrench. Or your channel locks whatever you have start putting some force on this thing. It should come right apart you shouldn't have any. Issues.
How do you replace a PVC drain pipe?
Youtube quote:Just kind of get it where it needs to go cutting. It I cut this on my miter saw you can cut it by hand with a handsaw. It sounds pretty easy to work with it's not too bad.
How do you replace bathroom sink water lines?
Youtube quote:And their ability the first thing you need to do is to turn the water off at the water supply line and it doesn't hurt to get a container. And put it directly underneath.
How do you install double sink plumbing?
Youtube quote:Start by making sure the tailpiece nut has been removed from the sink strainer. Place the tailpiece washer onto the tailpiece and feed the nut up the pipe.
Does a double sink need two P traps?
Related Articles. A double bathroom sink installation rarely requires more than one P-trap. The usual practice is to connect the two sinks to a tee and then feed the tee into a single P-trap, which then connects to the drain. The pipes you use to connect the sink to the P-trap are the same type the P-trap is made from.
Does a double sink need 2 traps?
A double sink vanity has two sinks. Each sink will need its own drain. But two sinks don’t need their own p-traps. It is common practice for them to share one trap.
Can you have two sinks on one drain?
In most cases, you can easily adapt the supply and drain pipes to accommodate two sinks, using tee fittings, special valves, extension pipes and hoses. You may have to vent each sink separately, though, depending on your local plumbing codes.
How much does it cost to convert a single sink to a double?
The Cost to Convert a Single Sink into a Double Sink
In the United States, the average costs of a vanity installation are about $1,500, but the price can range from under $500 to nearly $4,000, depending on the features you require.
Can two toilets share the same drain?
Most houses have more than one toilet, and if they are on the same side of the house, their waste lines can usually tie into the same stack. If they are on opposite sides, however, each may need its own stack. Since the stacks must be vented, this would mean two vent openings on the roof.
How do I convert a single bathroom sink to a double?
Youtube quote:We hired a plumber to come in and remove the single drain and make a double drain. And as you can see we have two sets of hot and cold water spigots. Now. We did go back and re-drywall because the
How do you add a second bathroom?
The easiest way to add a bathroom is to tie it into the existing plumbing, so if you can site the bathroom on the opposite side of an existing bathroom wall where the pipes can meet each other, your plumbing costs will be reduced for the new bathroom.
How do I connect plumbing to a new sink?
Youtube quote:The way this connection works is that the nut goes down over the pipe. The ferrule goes next and then we have to be sure to put the pipe all the way into the fitting.
