In a nutshell, you have to detach the supply line from the fill valve and add a T-joint. This T-joint will then run water to the bidet attachment, and also allow the supply line to be reconnected. See below image. The problem is, when I reattach everything, the supply line connection to the T-joint is now leaking.
Why is my bidet attachment leaking?
If the bidet seat is mounted too far back, part of the nozzle port may be positioned on top of the bowl, as opposed to fully inside of it. If part of the nozzle port is on top of the bowl, water will leak onto the bowl surface and drip over the side of the toilet during a wash.
How do you stop a leaky bidet?
Quote from the video:
Quote from Youtube video: If. So great looks like we found the cause try to slide the bidet seat back into the bracket.
How do I fix a leaky toilet supply line?
Quote from the video:
Quote from Youtube video: Available the one quarter turn angle ball stop with a 7 16 to one half inch slip joint outlet is recommended. This valve comes in either a one-half inch nominal compression inlet for copper pipe.
Will tightening toilet bolts Stop leak?
If water is leaking from beneath the toilet, you might be able to stop it by simply tightening the closet bolts that secure the toilet to the floor. Use a putty knife or slotted screwdriver to pry off the caps that are covering the bolts. Then use a wrench to alternately tighten each bolt, a little at a time.
How do you use a Teflon tape bidet?
Quote from the video:
Quote from Youtube video: And it's what we do is wrap the tape around so it's going in an anti-clockwise direction. Like that or alternatively you could see it that the thread is being turned in a clockwise direction. Then.
Do you need Teflon tape to install bidet?
Quote from the video:
Quote from Youtube video: The same applies here at least with a line that I'm using it does have a compression fitting inside so you don't have to use the teflon tape.
How do I fix my Toto Washlet?
If somewhere else in your home there is a dishwasher or washing machine running, the decrease in water pressure can impact the wand. It should start working again when the water pressure stabilizes. When all else fails, try unplugging the toilet for a few seconds and then plug it back in.
Why is my toilet leaking from the bolts?
A toilet that leaks from its tank bolts is usually leaking because of damaged, misaligned or even cracked washers or bolts. You have to either tighten the bolts or replace them. Generally, two-piece toilets have a set of bolts that attach the tank to the bowl.
What happens if you overtighten toilet bolts?
Overtightened toilet tank bolts will crack the toilet tank or the bowl you are attaching it to. This is because toilets are made of porcelain, which is very hard but is prone to cracking. Porcelain won’t bend or flex, so an overtightened bolt will crack the ceramic.
Should you caulk around a toilet?
Caulk keeps your toilet secure the floor, and avoids any chance of injury or toilet malfunctioning. It’s actually required by the International Plumbing Code to caulk a toilet to the floor, and now knowing the reasoning behind it, why would you not want to?
What is the best caulk to use around a toilet?
Caulk usually comes in a tube and 100% silicone caulk is best for use on a toilet since it’s more resistant to water than other types of caulk, such as acrylic. Silicone caulk is typically a bit more expensive than other types, but that extra money will save you the problems that come with an improper seal.
How do you silicone around a toilet?
Quote from the video:
Quote from Youtube video: So we're going to caulk a thin bead of the silicone caulk all the way around the toilet. Here the front and the sides.
