Make sure the plastic pins that contact the flush actuator buttons are not too long. They can be “off” or slightly too long by a very small amount, Causing the issue. Also, make sure the actuator is installed so it fits flush to the wall, all the way around.

How do I stop the hissing noise when I flush the toilet?

Quote from the video:
Shut. The water off to the tank. Remove. The black cap off the fill valve grab the extension arm on the head of the fill valve by giving a quarter turn counterclockwise. Remove any visible debris.

Why does my toilet keep making a hissing sound?

A: The hissing noise is most likely a defective refill valve. There are two valves inside the tank on the back of the toilet bowl. One is the flapper valve, located at the bottom of the tank, which allows water to enter the bowl.

How do I adjust my Geberit inlet valve?

Quote from the video:
And out once it's out all you do is twist the valve and lift it up or down to suit the desired water level then twist it back into place reinstate the blue clip from the bottom up.

How do I adjust my Geberit dual flush valve?

Quote from the video:
As your button on top your rods push. On halfway down here is the half flush float. So this float if you twist it they're looking down from the top you twist that anti-clockwise.

What causes toilet to hiss after flushing?

A hissing sound can mean that the refill valve is still letting a tiny bit of water into the tank because it hasn’t shut off like it’s designed to. The valve shuts off automatically based on the water level in the tank. A faulty valve or one not set properly will keep running.

Why does my toilet make a whistling sound when I flush it?

When your toilet whistles, the cause behind it is the toilet fill valve. This valve floats and rises or falls as the water level does after every flush. When the float is low, the tank refills with the open valve. Once the water has reached the desired level, the valve will close, so it doesn’t allow any more water in.

Will a hissing toilet overflow?

The cause may be a defective fill valve, but more often it’s simply a misadjusted float. If the hissing isn’t accompanied by water spilling into the overflow tube, air may be making the hissing sound. In that case, the toilet doesn’t have a leak, but something is definitely wrong.

How does Geberit dual flush work?

Geberit dual-flush plates feature a visual cue so that everyone approaching the system knows instantly how to use it: press the small button to flush liquids and the large button to flush solids. It’s intuitive, but it also happens to save thousands of gallons of water every year.

How much water does a Geberit toilet use?

Geberit toilet systems: simple, reliable, beautiful



Standard flush volume is 1.6 gallons (6 liters) or 1.28 gallons (4.8 liters) for solids and 0.8 gallons (3 liters) for liquids, saving thousands of gallons of water per year compared to a standard toilet.

How do you adjust the water flow on a concealed cistern?

Turn an adjustment screw located on the top of the valve. To raise the water level, turn the adjustment screw clockwise; to lower the water level, turn the screw counterclockwise.

How do I fix my Geberit flush?

Quote from the video:
Now we can easily get here to the shutoff valve we're going to shut off the water. And at the same time you could also already remove the hose here from the shutoff valve. Or you can do that later on.

How do I stop my Geberit cistern from leaking?

Quote from the video:
Next it's the flush rods just take them and turn anti-clockwise.

How do you fix a noisy toilet fill valve?

Quote from the video:
Off the water disconnecting. The supply line and flushing it into a pail is usually enough to resolve this issue. The final cause is a faulty shutoff valve this style valve can commonly create noise.

Why is my toilet fill valve hissing?

A hissing sound can mean that the refill valve is still letting a tiny bit of water into the tank because it hasn’t shut off like it’s designed to. The valve shuts off automatically based on the water level in the tank. A faulty valve or one not set properly will keep running.

Why does my toilet keep making a hissing sound?

A: The hissing noise is most likely a defective refill valve. There are two valves inside the tank on the back of the toilet bowl. One is the flapper valve, located at the bottom of the tank, which allows water to enter the bowl.