Can you run recessed lighting off fan light?
Yes, you can do this. The easiest way would be to extend the wiring from the ceiling fan box to the new recessed lighting cans and connect them the way you listed.
Can I wire recessed lights from ceiling fan?
Connect the white wire that leads to the recessed lights, and the white wire from the fan/light to the white wire in the ceiling box. Connect the the black from the recessed lights, to the black ungrounded (hot) wire that’s controlled by the dimmer.
Can a remote control ceiling fan be hardwired?
Then, remove the remote receiver completely. To hardwire your ceiling fan you will need to connect the fan’s power supply to the hard-wiring in your ceiling. This will enable the fan to function via a wall switch. In most instances, the wires inside of a power box are color-coded.
Can you wire a fan and light switch together?
Connecting a Light and Fan to a New Switch
Connect the white wires together in the same way, then repeat with the ground wires. When you splice ground wires, you don’t have to cap them, but it’s still a good idea to do so because the cap helps keep them together. Mount the fan and light and move to the switch box.
How do you install a recessed light in a ceiling fan?
Quote from the video:
Quote from Youtube video: Within your existing can housing there is a metal bracket that holds the light socket if it is adjustable loosen the wing nut and slide the bracket to the top of the can housing.
How far should recessed lights be from a ceiling fan?
Keep the distance between blades and any light fixture at a minimum of 39 inches. Keep the distance between the fan blades and any wall at a minimum of 18 inches.
Can you add recessed lighting to existing ceiling?
Recessed lighting is easiest to install during new construction, but can be retrofitted into existing ceilings. Because recessed lighting is installed in the ceiling, it’s simplest to put in during new construction or a major renovation, before ceiling material goes up.
What kind of switch do I need for a ceiling fan and light?
With single-switch wiring, power to the fan is controlled by a standard single-pole wall switch, like a regular light switch. The fan has power when the switch is on, while the fan speed and the light (if the fan has one) are controlled by pull chains on the fan itself or by a remote-control device.
Can you put a ceiling fan on a 3 way switch?
If you want combined control, connect the ceiling fan box’s black wire to the three-way switch’s common lug. Next, connect the red and black travelers from the other switch box onto the other switch lugs.
Does a remote controlled ceiling fan need a wall switch?
Most remote-controlled ceiling fans don’t need a wall switch, but you can use a wall switch if you want to. Remote control ceiling fans use a transmitter to control when the fan is turned on or off, which makes a wall switch completely optional.
How do you wire a ceiling fan and separate light to one switch?
How to Connect a Ceiling Fan & a Separate Light to One Switch
- Shut Off the Circuit Breaker. …
- Remove the Wires From the Switch. …
- Strip the Insulation From Each End. …
- Create a Four-Way Pigtail Splice. …
- Test the Physical Connection. …
- Screw the Pigtails Into the Connectors. …
- Reattach the Switch.
Can I connect blue and black wires together?
If you only have one switch, connect the black and blue wires. The black and blue wires need to be connected. You will be able to control your fan and lights with a single switch.
How do you install a ceiling light without an existing wire?
Quote from the video:
Quote from Youtube video: Up through the wall with the romex cable and then i need to place the light fixture in the center of the room. So i just measured putting painters tape in the center of the room.