You will want to bury about 1/4th of the pole under ground (So dig a 6 foot hole). At the bottom of the hole, pour 1 foot of gravel, and then put in the pole. Now pour a bunch of cement (4+ bags), and make sure your pole is placed strait in the hole. Now shovel your dirt on top and you’re good to go!
How deep should a steel post be?
The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).
How big of a hole do you need for a 4×4 post?
12 inches
The diameter of your post hole should be three times the diameter of your post. So, if you’re planning on using a four-inch round or 4×4-inch square post, your post hole will need to be 12 inches in diameter. For a six-foot-high fence post, we would need a hole that’s 36 inches deep and 12 inches in diameter.
How much concrete do I need for a 4×4 post?
How Much Concrete For A 4×4 Fence Post?
| Depth | 50 Lb Bags |
|---|---|
| 10″-14″ | 2 |
| 16″-22″ | 3 |
| 24″30″ | 4 |
| 32″36″ | 5 |
Can you put dry concrete in a post hole?
Quote from the video:
Quote from Youtube video: Because there is no mixing you simply pour it into the hole. Dry. Then add water when digging your post hole it is important that the diameter of the hole be three times the width of the post.
How deep should an 8 foot post be in the ground?
about 2 feet deep
For an average fence post, about 6 to 8 feet tall, prepare to dig a post hole about 2 feet deep. To install a fence post, you’ll need a shovel or post digger, a 6-foot level, soil, and gravel or crushed stone.
How deep should a 4 foot metal fence post be?
24-inch
As a general rule, Fencing Direct recommends at least a 24-inch footing depth for a 4-foot fence, plus an extra 3 inches for every foot of height (for example, 27 inches for a 5-foot post). The minimum hole diameter should measure four times the largest cross-section of the post.
How do you install a 4×4 post in the ground?
Quote from the video:
Quote from Youtube video: Attach a length of wood to the post and stakes to form a basic support brace holding the post upright while you position it straight use a level to ensure the fence post is perfectly vertical.
Do metal fence posts need concrete?
You can install a chain link fence without using concrete, but it is not recommended. Anchoring each fence post in concrete is the best way to ensure your fence will stand straight and tall for many years.
Is 18 inches deep enough for a fence post?
The general rule of thumb when setting a post is that the depth of the post’s hole needs to be one-third to one-half of the actual above-ground height of the post. So, a six-foot-high finished post ideally needs to be buried three feet into the ground.
How do you cement a metal pole into the ground?
Place 6 inches of gravel in the bottom of your hole for drainage. Place the metal post so it sits securely in the bottom of the hole atop the gravel and is centered. Shovel or pour 8 to 10 inches of gravel into the hole around the post. Pack in place with a heavy tamp or the handle of a shovel.
How do you concrete a steel post?
Quote from the video:
Quote from Youtube video: Clean that hole out a little bit though and then we'll be ready to set our posts grab. My coffee here and walk up to the barn. See what Chris is doing went to Home Depot. Got. Some more materials.
Can I mix quikrete in the hole?
With Fast-Setting Concrete there is no mixing or tools required – You simply pour the dry mix right from the bag into the hole, then add water. Fast-Setting Concrete sets in about 20 minutes so you can quickly move onto the next step of your outdoor project.
Is Quikrete as strong as concrete?
Quikrete fast setting concrete is just as strong as regular concrete. Concrete gets its strength from a chemical reaction that occurs over time during curing. After it’s had time to cure, which usually take 28 days to complete, Quikrete can reach strengths up to 5000 psi.
How do I keep my post level while concrete dries?
You need to level it in two directions with a 4-foot level. After getting it straight in the first direction, hold one of the braces against the post and drive a single screw to connect the brace to the post. You can then level and brace the post in the other direction and begin filling the hole.
How many bags of concrete do you need for a fence post?
Most fence post holes will need between 1 – 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.
Should I use concrete or cement for fence posts?
Concrete provides a strong foundation for wooden fence posts, but can rot them more quickly. Setting them in dirt, with or without gravel or crushed rock depending on your soil type, can help the posts last longer before going rotten. You can also use metal fence post anchors to prolong their life.
How much concrete is needed for a post hole?
A: Finding the right amount of concrete depends on the size of the hole and the size of the post. The diameter of the hole should equal about three times the diameter of the post and the depth of the hole should be about ⅓ to ½ the total length of the pole.
How do you install a 4×4 post on concrete?
Quote from the video:
Quote from Youtube video: Remove the base and then drill into the concrete using a hammer drill. And masonry drill bits. Move the post support back over the holes.
How do you anchor steel post to concrete?
Quote from the video:
Quote from Youtube video: First the wedge anchor is inserted through the fixture. And into the concrete. The nut is then turned clockwise pulling the anchor up. And moving the clip down wedging.
How long will a treated 4×4 post last in the ground?
A treated 4×4 will last 20 to 25 years in the ground if the conditions in the soil and climate are favorable. That number could increase to 40 to 75 years if you install the treated 4×4 in a cement ring rather than the soil. There are a few factors that influence how long the 4×4 can last in the ground.
