You can get plastic p-trap kits in 1-1/2″ and 1-1/4″, and these can be easily connected to your copper via slip ring compression fittings. Basically they consist of a nut with a cone-shaped plastic washer, which when compressed by the nut squeezes against the (copper) pipe to create a seal.
How do you tap into a copper drain pipe?
Quote from the video:
Quote from Youtube video: You're able to tighten them up and that's how you adopt from inch-and-a-half copper over 2 inch and a half abs PVC cast iron something like that this really helps with older home remodels.
Can you attach PVC to copper?
Compression adapters make the best joints between copper and PVC. You can connect PVC or CPVC to copper in several ways. One common method is to solder a female threaded fitting onto the copper pipe, screw in a male threaded plastic fitting and finish up by gluing plastic pipe to the plastic fitting.
How do you attach p-trap to metal wall drain?
Quote from the video:
Quote from Youtube video: We'll take a nut place it over a metal pipe and then take a washer slide that plastic over the metal pipe. And then slide your s trap. Into your pipe. And then tighten that nut.
How do you hook up a p-trap to a drain pipe?
Quote from the video:
Quote from Youtube video: Off of the drain assembly pipe coming down to make it all fit so i've got it all dry fitted together i'm going to glue the abs fitting on and then we're going to simply just screw together the pieces.
How do I connect copper pipe without soldering?
Quote from the video:
Quote from Youtube video: And all you do is just push it into place give it a little twist in its lock solid watertight. And what's interesting they have a few different fittings they also have push fit valves.
How do you join copper water pipes?
Quote from the video:
Quote from Youtube video: Sliding it over the copper like. So sliding your furlan. Slide and furlan. So and putting in the fitting and tighten it down do the same thing in the other end you can replace a piece of pipe.
How do you connect PVC to copper pipe without welding?
A compression fitting is the best way to connect PVC to the copper pipe without welding. Another option is a push-fit fitting, also called a shark bite fitting.
How do you connect plastic pipe to copper pipe?
Quote from the video:
Quote from Youtube video: And then we need to put the nut over the end of the pipe and you'll find that that is a pretty snug fit as well. And then this is the olive copper olive that goes over the end of the pipe.
How do you connect PVC to brass drain?
Connect a female adaptor on the PVC pipe with primer and glue. Wrap the threads of the brass pipe with Teflon thread tape several times. Screw the two together by hand. Hold the brass pipe with a wrench, and with another wrench tighten the PVC fitting on the brass pipe.
How do you install a p-trap adapter?
Quote from the video:
Quote from Youtube video: I'm going to take some of the PVC glue I'm going to run it around. Inside. I'll make sure touch that lip when you're looking down inside of your adapter there's a small lip. It's kind of a stop.
Can p-trap be lower than drain pipe?
It is not ideal to have the p-trap below the the exit drain because water gravity has to force the water out instead of it flowing downwards naturally. They both work and have seen it many times. But essentially anything below already creates its own p-trap- so using another is redundant.
How far below drain should p-trap be?
However, the Universal Plumbing Code stipulates that the total developed length of all tailpieces, arms and fittings connecting the drain to the p-trap must be 24 inches or less. Jennifer Roberts has enjoyed writing since 2008.
Does p-trap have to be directly under shower drain?
The maximum distance between the shower drain and the P-trap is 5 feet. However, the P-trap should be as close to the shower drain inlet as possible. You should even have the P-trap directly under the shower drain for the best results.
Does p-trap need to be right under shower drain?
First, your P-trap should be located directly below the center of your shower and close to your shower drain. Homeowners who install their P-traps too far away from the drain may experience more odors than what’s normal.
Which way does the p-trap go?
When you cement it together, the straighter side of the trap- which is not as curved- should be what the 90 degree piece is glued onto. Then the curved end should be connected to the shower drain.
Do you glue P-trap?
In a Shower P-Trap, Can the Lower Curvature Be Backward? When you cement it together, the straighter side of the trap- which is not as curved- should be what the 90 degree piece is glued onto. Then the curved end should be connected to the shower drain. However, gluing the P-trap shouldn’t affect the drainage.
Are P traps reversible?
It is reversible, but when reversed, the tail piece going into the u trap is only about 5/8. It is not a secure connection.
How do you tell if P-trap is working?
Quote from the video:
Quote from Youtube video: If you take the letter p flip it around and lay it down that's what you see right here there's a letter p. And that's why it's called that so the p trap has been around for a long time.
How do P-trap looks like?
In a nutshell, a p-trap is a u-shaped bend in the waste pipe that connects a sink’s drain to a home septic tank or to a municipal sewer system. Under normal circumstances, p-traps always contain some water.
Why is my P-trap not draining?
Clean the P-trap. If the water is still not draining correctly, there might be a blockage in the P-trap, aka the elbow-shaped pipe under your sink. Food, grease and other debris may be stuck in the pipe, causing your sink to drain slowly or not at all because the water hits a snag on its way down.
