Fill a spray bottle with vinegar. Apply the vinegar liberally over the stained area. Wait about 20 minutes, then wipe away the stain with a sponge. Rinse with warm water.

How do I get rid of GREY stains in my bathtub?

After searching a few websites, I learned you can use a mixture of peroxide and cream of tartar to make a paste and scrub over the area with a toothbrush. Also, you can mix fresh lemon and vinegar together and wipe over the area or place a cloth dipped in the solution over the stain.

What causes GREY stains in bathtub?





Soap scum (also called lime soap) is a white, chalky residue that appears as a white or gray filmy layer that covers the surfaces around our showers, bathtubs, and sinks. Soap scum is made by calcium stearate and magnesium stearate, among other materials, mixing with hard water.

How do you clean a badly stained bathtub?

Combine two parts vinegar and one part water in a spray bottle and spray the entire bathtub. Allow this soaking solution to sit in the tub for 15 to 20 minutes. For tough stains: place a towel soaked in a vinegar and baking soda paste or hydrogen peroxide onto the stain(s) and allow the towel to sit for up to one hour.

How do I get my bathtub back white?

How to Clean and Get a Bathtub White Again in 7 Steps

  1. Gather Your Materials. …
  2. Microwave the Vinegar. …
  3. Pour Dish Soap Over the Tub. …
  4. Add warm vinegar. …
  5. Add baking soda. …
  6. Scrub that tub. …
  7. Wipe down it down and rinse. …
  8. Make sure you can ventilate your bathroom.

Will baking soda and vinegar remove hard water stains?

Add baking soda to some of your vinegar and water mixture in a small bowl, then apply the paste it creates to the stain with your scrubbing brush. If all else fails, you can purchase a hard water stain remover from your local hardware store. Or invest in a soft water system and say so long to stains for good.

How do you clean a discolored fiberglass tub?





White vinegar



If you have a fiberglass tub in your bathroom, it may appear dirty and dingy. However, a simple mixture of two parts white vinegar and two part water is all that’s needed to remove the discoloration. Mix them in equal volume and pour the mixture into the bathtub.

How do you remove charcoal stains from a bathtub?

First, cover the stained area with a coat of baking soda. Then, mix up your cleaning solution in a spray bottle: 1 cup vinegar, 1 tablespoon of dish soap, and 3 cups of water. Spray this mixture over the baking soda. Use a soft sponge to scrub the stained areas.

How do I remove stains from an enamel bath?

In order to clean your enamel bath a mixture of water and white vinegar will be sufficient. If there are tougher stains sprinkle a little baking soda followed by the vinegar and water solution. After applying the solution, leave to settle for a few minutes then wipe with a soft cloth to reveal the gleam.

How do you make an old bathtub look new?


Quote from Youtube video: You know if your tub is damaged all the needs repair it can be made to look new again by having a tub liner installed or having it refinished. But if you need a brand new tub.

What home remedy can I use to clean my bathtub?



Blend ¼ cup quantity of liquid dish detergent in vinegar. Shake the spray bottle to blend both ingredients. Spray the cleaning mixture on soap scum and other dirty regions of bathtub. Wait for 10-15 minutes and then wipe the treated areas with a soft sponge.

Can bleach damage a bathtub?

Back to the question, “can bleach damage a bathtub?” Yes, it can. Bleach can add stains to your bathtub is misused. Remember, it is a massive chemical that, if not used correctly, can cause more harm than good.

What is the fastest way to clean a bathtub?

Quote from the video:
Quote from Youtube video: With ingredients you probably already have just get yourself a mixing bowl and add equal parts of baking soda and dish soap here.

Can I soak my bathtub in bleach?



Bleach is safe on fiberglass or white porcelain. Mix ½ cup bleach into about a gallon of water. Using a sponge, coat the tub’s surface with the bleach and water solution and wait 5 minutes. After 5 minutes, scrub the surface with the sponge, paying special attention to the tougher stains.

What is the best cleaner to clean bathtub?

Here are the best bathtub cleaners of 2021

  • Best bathtub cleaner overall: Mr. …
  • Best bathtub cleaner for hard water and rust stains: CLR Pro Calcium, Lime, and Rust Remover, $5.87 from The Home Depot. …
  • Best bathtub cleaner for mold and mildew: Clorox Plus Tilex Mold and Mildew Remover, $4.36 from The Home Depot.

How do professionals clean the bathroom?

Clean your bathrooms fast and efficiently by using this 10-step process.

  1. Remove all items from their usual spots. …
  2. Dust and sweep. …
  3. Apply cleaner to shower and bathtub. …
  4. Tackle other surfaces. …
  5. Mix cleaning solution for floor. …
  6. Hit the shower and bathtub. …
  7. Finish the shower and bathtub. …
  8. Clean the vanity area.

How do you bleach a stained bathtub?

Fill a spray bottle with equal amounts of water and bleach. Shake this up and spray it over the inner walls of the bathtub. You can also use this solution on mildewed areas around the bathtub.

How do I get my tub white again Reddit?



i’d dry the tub, coat a layer of that on the stains and let it sit over night. then i’d throw some drain cleaner powder on it, mix and sit. after a few treatments, it’s much better. it’s almost like a teeth whitening program.

Does peroxide remove stains?

Hydrogen peroxide is a very effective stain remover for protein- and plant-based stains. And it works well in treating mildew, blood, fruit and vegetable, and dye-transfer stains.