Shovel in backfill as you build the wall, one tier at a time. Don’t add all the backfill at the end—it won’t compact thoroughly. Tamp down the gravel as you go with a heavy hand tamper. Behind the top tier of the wall, add 6 inches of topsoil and lightly compact it.

What do you put behind a retaining wall?

Backfill the wall with gravel or sand. If you use sand, first cover the backside of the retaining wall with landscape fabric. This will keep the sand from seeping between the blocks. If you’re backfilling with gravel, you can pour the gravel after every course you lay.

What type of gravel is best for retaining walls?





crushed stone

Our experts prefer crushed stone for the base rather than naturally occurring gravel dug from a pit. Crushed stone is a little more expensive. However, it provides better drainage, and because of the sharper angles on the stone, it requires less compacting, and once it’s compacted, it stays that way.

What base should I use for a retaining wall?

gravel

The base material should only consist of angular, sharp-edged particles such as ¾-inch minus gravel. The various-sized crushed gravel with the fines helps ensure the right amount of compaction. Round rocks, such as pea gravel, roll and dislodge under pressure resulting in failure of the retaining wall.

How do you compact soil behind a retaining wall?






Quote from Youtube video: Then backfill behind the wall rock using approved on-site soils compact behind the Block in a path parallel to the wall working from the back of the block to the back of the backfill. Area.

How do you backfill behind a retaining wall?

Steps For How to Backfill a Retaining Wall

  1. Lay your base of compacted native soil (about three inches deep).
  2. Tamp the soil to ensure that it is secure and firm.
  3. Fill the next six to twelve inches with aggregate or gravel.
  4. Tamp the gravel or aggregate to ensure a sturdy base.

What is the best method for compacting the backfill soil in retaining wall?

Preet Chovatiya. For draining area, sandy soil or sandy gravel is best for retaining wall backfilling material, because It cause easily water draining.

How do you compact a backfill?

  1. After soil is backfilled into a trench, the loose material is compacted using some mechanical means, such as a compactor, an excavator, or a “jumping jack”-type compactor. …
  2. With the jetting technique, you pump the water under pressure and use the force of the jetted water to move the bedding or backfill material around.