How do you hook up a plastic water line to a refrigerator?

Quote from the video:
Quote from Youtube video: Another refrigerator ice maker water line that is set up just like this one so if you've already got the connection in the wall.

Can you use plastic tubing for refrigerator waterline?

To hook up a refrigerator ice maker, you will need to connect a line of plastic or copper tubing to a cold water line to carry water to the refrigerator. Plastic tubing is less expensive and easier to install than copper.

How do you connect PEX water line to refrigerator?

Quote from the video:
Quote from Youtube video: Once we have that valve in place we're going to use a braided. Water line that will attach that line we've got to drill a couple holes through the cupboard.

How do I connect an existing water line to my refrigerator?


  1. Turn off the Water. Locate the fixture shutoff valve on the cold water supply line under the kitchen sink. …
  2. Disconnect the Faucet Water Line. …
  3. Connect the Tee Adapter. …
  4. Connect the Faucet and Refrigerator Supply Tubes. …
  5. Connect the Supply Tube to the Refrigerator. …
  6. Turn on the Water.

Can I use plastic tubing for ice maker?

Answer: You’re right to be concerned, because plastic tubing to an ice maker is susceptible to cracking and splitting. The constant flow of hot air from the compressor fan in the essentially unventilated space behind the fridge blows over and around the tubing — and eventually makes it quite brittle.

How do you plumb a refrigerator water line UK?

Quote from the video:
Quote from Youtube video: Water supply tap connector on the back of your appliance external water filter with attached water hose white wall brackets tap adapter with porous filter and connector black hose clips.

What kind of tubing do you use for a refrigerator water line?

Decide what tubing material you want to use for your water supply line. The tubing should have a diameter of 1/4-inch and can be copper line, braided steel line or plastic tubing. Many professionals prefer copper line, but plastic tubing is commonly sold as part of ice maker installation kits.

What type of tubing is used for a refrigerator water line?

Best Water Line for Fridges

Copper tubing is commonly used by plumbing professionals who prefer it for its strength and relative rigidness, making it less likely to spring a leak than more flexible materials, explains Family Handyman.

What type of water line is best for refrigerator?

The Best Choice: Stainless Steel Tubing

Overall, stainless steel tubing is my recommendation for your fridge’s water line.

What can I use instead of a saddle valve?

A similarly DIY-friendly but more reliable alternative to a saddle valve is a push-fit tee connector designed for ice makers and water dispensers. You install these by cutting out a short section of pipe and installing the tee right into the water line, then adding the small supply line leading to the appliance.

Can I pour water into my ice maker?

You can manually fill your refrigerator’s ice maker. To do so, fill a cup with tap water or filtered water. Pour the water slowly into the reservoir at the back of the ice maker. Do not splash or overfill the reservoir.

How much does it cost to install a water line for a refrigerator?

A typical water line costs between $65 and $170 to run. The cost to install a basic refrigerator on a first floor kitchen with a water line is about $250. If you need an electrical outlet installed by an electrician, you’ll need to pay an average of $220-$750 per outlet.

How do you install a water line?

Quote from the video:
Quote from Youtube video: And you just set it on the pipe and cut through like butter. Now remember that there's water in here I've drained. It but there's definitely still gonna be some water in. Here.

Does Home Depot install water line?

The Home Depot can help with emergency plumbing services and repairs. If your toilet, sink or garbage disposal needs repair that requires professional help, let us fix it for you. Our licensed, local plumbers can also repair frozen, burst or leaking pipes, clogged drains, and sewer and gas lines.

How much does it cost to tap into a water line?

Cost to Replace a Main Water Line Per Foot

Installing a water main costs an average of $50 to $150 per linear foot.

Can you use PEX pipe for main water line?

You can install PEX fittings supply just like you would other pipe, with main lines and branches to each fixture. But you lose a lot of the benefits of PEX with this system since it requires so many fittings.

How deep should water lines be?

The general depth of underground water pipes is 12 inches below the frost line in your specific geographical area.

Who is responsible for water line from street to house?

Water pipes

Type of pipe Laid under Responsibility for pipe
Water mains Land owned by someone else Water company
Communication pipe Highway Water company
Supply pipe serving a single property Highway Property owner
Property owner’s land

How do I find my water supply pipe?

To find the water line to a house, find the water meter or well and the point where the line enters the home. The underground water line runs between these two points.

Do sewage pipes run under houses?

The main sewer line can be installed under the slab foundation and run underneath the yard or underneath the house for homes on raised foundations. Typically, main sewer lines will have at least two cleanouts, an end of the line and front cleanout.