Where is the water shut off valve on a toilet?

Locate Your Toilet’s Shut-Off Valve



Your toilet’s shut-off valve is likely located to the bottom left of the unit. You’ll notice a pipe emanating from the bottom of the tank and connecting to the wall — that’s where you’ll find the shut-off valve. In some cases, the pipe can also be connected to the floor.

How do you access a concealed toilet?





Here’s how to access a concealed toilet cistern:

  1. Locate the toilet cistern’s push button.
  2. Slightly lift the cover plate and remove it. …
  3. Carefully remove the flushing rods located at the centre of the concealed cistern frame. …
  4. Unfasten any plastic bolts manually to release the frame.

Do all toilets have shut off valves?

Toilets, just like other plumbing fixtures, come with a shutoff valve. The shutoff valve is mostly located in the toilet’s water supply line. It’s necessary for every toilet to have its dedicated shutoff valve for convenience.

How do I find the water supply to my toilet?


Quote from Youtube video: So you'll see a knob in between the pipe that comes off from the ground or wall and the pipe that connects to the toilet tank now to turn off the water supply to the toilet.

How do you turn off the toilet fill valve?

To turn off the water supply to a toilet, simply close the toilet’s shutoff valve, which looks like a football-shaped valve located beneath the tank. Turn the valve clockwise until it can’t turn anymore, then flush your toilet.

How do you fix a toilet shut off valve?





How to Replace a Toilet Shut-Off Valve

  1. STEP 1: Cut the water supply. …
  2. STEP 2: Drain the water lines. …
  3. STEP 3: Disconnect the supply line. …
  4. STEP 4: Remove the old toilet shut-off valve. …
  5. STEP 5: Install the new shut-off valve. …
  6. STEP 6: Attach the toilet supply line. …
  7. STEP 7: Turn on the water.


How do you open a single toilet cistern?

By pushing the single flush button down a bit, you’ll be able to place the screwdriver into the side of the larger button. You’ll find a little indent that the screwdriver can get into to allow you to lift the button up and out. Once you’ve taken it off, the other button should just lift off.

How do concealed toilet cisterns work?

Now, a hidden cistern – such as this fine Vellamo Slim Dual Flush Concealed Cistern unit – works by fitting into a cavity positioned in the wall behind the toilet seat. By hiding the toilet cistern in this manner, the toilet seat can be positioned flush against the bathroom wall.

How do you access the toilet tank in the wall?



The tank is usually hidden within a wall. The toilet bowl in this toilet design is mounted onto a frame on the bathroom wall. To access such a toilet tank, you’ll need to remove the wall plate hiding the flush mechanism, also known as a flush actuator.

How open should water valve be?

If the handle on top is parallel to the valve, it’s open. Likewise, if the handle is perpendicular to the top, the valve is closed. Common places you might find a ball valve are in irrigation and in sites where you need to control water supply from one area to another.

Is it OK to turn off water supply to toilet?

It’s recommended you shut off your water when: A pipe, fixture, or appliance is leaking. The toilet is running constantly even after adjusting the parts in the tank.

How do you empty a toilet bowl?



Plunge out the Water



After shutting off the water supply valve, place the flange of a toilet plunger (also called a closet plunger) firmly into the drain hole in the bottom of the toilet bowl. Plunge with an up-and-down motion to get most of the water out of the bowl. This should force out any clog into the drain.

How do you turn the water back on a toilet?

Turn on the Water



Turn the water on at the supply line, let the tank fill, then flush the toilet. Be prepared to turn off the water if the toilet starts to overflow again. Leave the water turned on if the tank empties, the water flushes from the bowl, and the water cuts off automatically once the tank refills.

Why is there no water coming into my toilet tank?

No Water in Toilet Tank



If there’s no water in the toilet tank, make sure the water supply valve is fully turned to the open position and check the water supply line for leaks. Make sure there’s no problem with the water supply to the bathroom or rest of the house.

Why is my toilet filling up with water and not flushing?

If your toilet isn’t flushing all the way, it’s most likely because of one of these problems: The water level in your toilet tank is set too low. Problems with your flapper. A clog in the toilet, flange or drain.

What is the fill valve on a toilet?



The fill valve is the part of the toilet that is responsible for refilling the tank after being flushed. Over time, a worn or out of alignment fill valve can become a problem, cause a leak, and wear on valve’s components and parts.