Can you use a motion sensor with a fluorescent light?
The specifications on this particular motion detector say “The PR150 installs in place of a single pole switch, and it can be used with incandescent and fluorescent lighting (Rapid Start Magnetic ballast ONLY).” Newer ballast are gonna be electronic.
Can you convert a plug in light to hard wired?
One major benefit of turning a plug-in light into a hardwired one is that a plug-in is often far cheaper than a ready-to-go hardwired one. They are way more customizable too, and it only takes about 5 minutes to transform the fixture! You can see this one in place hanging from the ceiling here.
How do you hardwire a fluorescent light fixture?
Quote from the video:
Quote from Youtube video: We should have a couple of black wires what goes to each balance the white wires go together do black wires to go together.
Where does ground wire go on fluorescent light fixture?
The screw is almost always directly attached to the metal body of the fixture or to metal that is connected to the metal body. The ground wire from the cable (also usually green) should be attached to the grounding wire on the fixture with a wire nut or screwed to the grounding screw.
How do you install a motion sensor in a shop light?
Quote from the video:
Quote from Youtube video: First step is to remove the old light switch pull off the cover this one was painted on so I had to use a utility knife and cut around the paint. Pulling these apart is fine with the power-on.
What is in fluorescent lights?
A fluorescent lamp consists of a glass tube filled with a mixture of argon and mercury vapour. Metal electrodes at each end are coated with an alkaline earth oxide that gives off electrons easily.
What is a hardwire conversion kit?
Convert Hardwired Security into Wireless
The 2GIG Hardwire Conversion Kit includes all of the essential components you need to upgrade an existing hardwired security system into a 2GIG wireless system.
How do you hardwire an outlet?
Wire the New Electrical Outlet
- Mount the new box in the opening.
- Connect the new wires to the new outlet: white (neutral) wire to a silver-colored terminal screw; black (hot) wire to a gold-colored terminal screw; bare wire to the green grounding screw.
- Make sure the cable sheath remains secured inside the box.
How do you hardwire rope lights?
- Turn off the power to the house.
- Cut off the plug on the rope light with wire cutters. …
- Unscrew the wall plate and the electrical box from the wall. …
- Run the rope light electrical cord to the electrical box. …
- Connect the rope light wiring to the wiring in the light switch and the wiring in the wall.
Do fluorescent lights need an earth?
As the fluorescent light you have is a Class 1 metal cased type it must be earthed, leaving it unearthed presents an electric shock and possible fire risk.
How do you wire a batten light?
Quote from the video:
Quote from Youtube video: This one here with the green on it. That's your earth scene. Put your earth cable in there this terminal here labeled loop that one there acts as a connector.
How do you ground a ballast?
If the ballast has no direct ground connection then you can use a blue (for #14 and #16 wire) stake-on fork on the stranded wire from the cord and attach it directly under the ground screw or you can wrap a short piece of solid green or bare #14 wire around the screw and attach it to the cord by a wire connector.
How do you wire a t8 ballast?
Quote from the video:
Quote from Youtube video: And here's the white going back to the ballast. I'm going to show those two wires in and they're nice and tight I'm going to kind of just push them up here to get them out of the way.
What happens if you do not connect the ground wire?
The appliance will operate normally without the ground wire because it is not a part of the conducting path which supplies electricity to the appliance. In fact, if the ground wire is broken or removed, you will normally not be able to tell the difference.
Does the ground wire have to be attached?
Grounding refers to the wire that runs from an outlet into the earth, inherently protecting homeowners from coming in contact with electric energy. No matter the method, it’s important that the ground circuit provides an unbroken path to the earth. Ground wires must be firmly connected at all points.
How do you hook up a ground wire to a light fixture?
If your light fixture has its own green ground wire you will need to connect the two ground wires using a wire nut. To use the wire nut simply insert the tips of both wires and turn the wire nut in a clockwise direction until tight.
What happens if a light fixture is not grounded?
Accidentally touching the metal casing of an appliance that’s not grounded and experiencing a surge of electrical current can result in serious injury. Grounding helps prevent these kinds of accidents from occurring.
What if I don’t have a ground wire for light fixture?
A plastic box with no ground
You’re just as well off leaving the wire unconnected as you are trying to ground to plastic. You can wrap the wire around one of the screws that holds the fixture on, but the only purpose it serves is to help hold the fixture up while you wire the black hot and white common wires.
What is the purpose of a ground wire in a light fixture?
The purpose of a ground wire is to give excess electrical charges a safe place to go. The solid mass of earth below our feet has a negative electrical charge, which means positive electrical charges are naturally attracted to it.
