How do you hook up a washing machine drain?
Quote from the video:
Quote from Youtube video: If the top of the drain pipe or siphon break is located above the maximum height allowed your washer will not be able to pump out water adequately. As a result the water may flow back into the washer.
How do you connect a drain hose to a drain pipe on a washing machine?
Quote from the video:
Quote from Youtube video: Always secure the drain hose to a laundry tub leg a drain stand pipe or an inlet hose with a cable. Tie. Slowly turn on the water to check for leaks a small amount of water may enter the washer.
How do you plumb a laundry box?
Quote from the video:
Quote from Youtube video: And they're really neat they're really easy to install they come with these little uh wings that clip into the side of the box. And you pick out which one you want and you anchor it down to the stud.
How do you install a washing machine standpipe?
Insert the glued standpipe to the p-trap that should be long enough to extend to a level above the washing machine. Use pipe strapping to secure it in place. Add a vent approximately 5 feet from the position of the p-trap and attach a sanitary tee to the vent.
How do you install a washer outlet box?
Quote from the video:
Quote from Youtube video: Start by inserting the mounting brackets into the slots on the sides of the box. Always remember to install above the water height of the washer.
Does a washing machine drain need a trap?
If they omit the trap and vent, it’s a mistake that can cause problems on two counts. The lack of a P-trap exposes the area to sewer fumes and the lack of venting will cause the drain to run sluggishly and overflow. Washers, like all fixtures, need a trap.
How do you secure a washer drain hose to a utility sink?
- Measure the distance from the height of the sink. …
- Loop the bent end of the hose over the lip of the sink, which should not be more than 45 inches away from the washing machine.
- Secure the hose to the leg of the laundry sink using a plastic cable strap.
- Choose a seamless PVC or steel pipe with the appropriate threaded NPT fitting to mount the ultrasonic sensor. …
- Cut the end of the standpipe at a 45° angle. …
- Place the pipe as vertical as possible with an unobstructed path to the target. …
- Mounting the pipe is the toughest part.
Which end of the hose goes into the washing machine?
To connect the water hose, follow these steps: You will notice the mains water inlet hose has a right-angled connector at one end and a straight connector at the other end. The right-angled connector should be attached to the water inlet valve at the back of the washing machine.
How do I connect my LG washer drain hose?
Quote from the video:
Quote from Youtube video: If you are using a sink just hang the elbow bracket over the side of it. Then secure the drain hose with a tie strap or a safety chain. And you are all done.
How do I connect my standpipe?
Quote from the video:
Quote from Youtube video: Keep your head and body clear of the standpipe screw the standpipe in a clockwise. Direction to make sure it is firmly secured only turn the swivel head in a clockwise.
Does a washing machine drain hose need to be elevated?
Yes, the drain hose needs to be elevated and it’s always best to do so at a level that’s higher than the washing machine itself. This will prevent possible siphoning. There are also other steps you can take to ensure that you get the best drainage.
How do you fit a standpipe?
Need to Install a Standpipe? Here’s how:
How high should washing machine drain pipe be?
In order for the drain hose on your Top Load washer to function properly, the drain must be at least 30″ up from the floor and less than 8 feet high. In order for the drain hose on your Front Load washer to function properly, the drain must be at least 24″ up from the floor and less than 8 feet high.
What is a washer standpipe?
A laundry standpipe connects a washing machine’s drain hose to a home’s waste stack. While it might be tempting to simply connect your washer to any other convenient drain line, doing so increases the risk of water overflow and sewer fumes.
