Shower Faucet Type and Brand Identification You can identify your faucet’s brand by looking for a mark that indicates who made it. It will be engraved, printed, or laser-etched. Some of the most common brands are included in the table below.
How can I tell what brand my bathtub faucet is?
Look at the center of the trim plate behind the shower handle to find a brand name or manufacturer symbol. If you see a “K,” the faucet is a Kohler unit; an “M” signifies Moen. American Standard, Delta and Price Pfister typically print their entire name on the faucet itself.
How do I identify my faucet brand and model?
Quote from Youtube video: Another quick tip is to look underneath the sink because sometimes you might be able to find a label that's attached to a supply line that will tell you the manufacturer.
How can you tell what kind of faucet you have?
Let’s look at how to do it now.
- Find the logo. The first and easiest way to find out the brand of your kitchen faucet will be if you can locate the logo somewhere on it. …
- Find a model number. …
- Count the splines on the broach and measure the stem. …
- Distinguishing features. …
- Use a broach gauge.
How do I identify my shower faucet cartridge and brand?
Quote from the video:
Quote from Youtube video: Off and then you can look behind the plate to see if there's a sticker in here that has the manufacturer.
How do I identify a faucet stem?
- It is easiest for us to identify your stem or handle needs by measuring your stem from the left where the washer is attached to the right where the handle fits on the knurled end (The Broached end).
- Broached ends are unique by manufacturer and is critical when identifying your stem or cartridge.
How do I identify my Moen faucet model?
Exact model numbers can be found on your box or on your instruction sheet. If unavailable, you may find the general family series number on the back of the spout (non pullout).
Where is the serial number on a Moen faucet?
The model/series number is usually a four or five digit number and can be followed by letters. On the underside of the spout, the series number may be found. There is a decorative ring at the bottom of the spout that has a series number on it.
Are all Moen shower valves the same?
For many years Moen tub/shower valves have been manufactured using one of three valves. These valves are Standard, Posi-Temp and Moentrol. Although the look is similar, the trim is not necessarily interchangeable.
How do you remove a Moen bathroom faucet handle?
Some Moen faucets have handles that remove by loosening the screw in the back of the handle. To loosen this screw use a 3/32″ hex wrench. After the handle has been removed unscrew the spout collar nut by turning counterclockwise then lift and rotate the spout.
How do you remove a Moen faucet handle without visible screws?
You can use an allen wrench (also called an allen key) to remove it. Once you’ve done that, you can typically just lift the faucet handle off. However, if it has a cartridge inside, you may need to unscrew a top piece as well to be able to remove the cartridge.
How do you remove a Moen bathtub faucet?
Quote from the video:
Quote from Youtube video: For a single handle Moen cartridge they're all held in place by a little retaining clip and so if you have an awl or a very small screwdriver. You're going to catch the end of the clip.
How do you change a cartridge on a Moen bathtub faucet?
Quote from the video:
Quote from Youtube video: Go through the steps on replacing a single handle Moen cartridge remove the handle the escutcheon plate. And tube the escutcheon plate is generally held in with two screws.
How do I identify my Moen shower cartridge?
Quote from the video:
Quote from Youtube video: Simply by going to your faucet years ago go into your faucet. And pull them pulling. On your cartridge if the handle pulls out it's a 12 25 cartridge.
How do I know which shower cartridge to buy?
Easiest of all is when it says the brand name right on the faucet face. But you should also look at the bottom of the faucet, on the handles or on the round plate behind the handles. If you find a brand name, go to the manufacturer’s website and call the contact number for assistance.
