Can you replace a fluorescent light fixture with an LED light fixture?

There are various methods for converting fluorescent lighting fixtures into LED ones. However, the simplest way is to use some sort of retrofit kit. These kits attach to already existing lighting fixtures and allow for LED bulbs to be housed in them.

How can you tell an LED from a fluorescent light?





Quote from the video:
Quote from Youtube video: Fluorescent tubes look like this they're all glass. These are old technology they require a ballast to operate a fluorescent tube typically a fluorescent tube will at between 20 and 25,000.

Can you replace fluorescent tubes with LED tubes?

Yes, you can replace fluorescent tubes with LED tubes or LED-integrated fixtures. If you just want to replace the bulbs, you can use plug-and-play, direct-wire, or hybrid LED tubes. Plug-and-play tubes are the easiest to install as they do not require any rewiring to the fixture.

How do you rewire a fluorescent light to a LED?

Quote from the video:
Quote from Youtube video: This particular fixture we're gonna take and put a black wire to this bank of tombstones. We're gonna put the white wire to that bank of tombstones. And when we put this bulb. In bingo.

Do you have to remove the ballast for LED lights?

An LED light does not require a ballast because it uses a component called a “driver” to regulate the power going into the bulb.

How do you bypass the ballast for LED lights?





How to Bypass A Ballast

  1. Step 1: Disconnect All Power So There is No Electrical Current. …
  2. Step 2: Find the Ballast. …
  3. Step 3: Locate and Cut Only the Hot and Neutral Wires. …
  4. Step 4: Cut the Socket Lead Wires. …
  5. Step 5: Remove the Ballast (if you wish) …
  6. Step 6: Connect the Wires. …
  7. Step 7: Reattach Any Coverings and Turn On.


How do I replace 4ft fluorescent with LED?

Quote from the video:
Quote from Youtube video: So the first step is to pop this loop around. And it will swing out of your way. And hang like so and we've already cut power at the breaker. So we're good to go removing these tubes.

Can you use LED tubes with electronic ballast?

Ballast-compatible, “plug and play,” or “direct drop-in” LED tubes make upgrading to cost-saving, long-life LED technology easy: simply take the fluorescent tubes out of your fixture and put the LED tubes in. However, direct drop-in LED tubes are compatible only with fixtures that have electronic ballasts.

How do I know if my LED tube is single or double ended?



A simple way to know if you have a single ended tube is to look for the L/N or AC INPUT sticker at the end of the tube. Since the single-end powered tubes only use one side of the tube, both live and neutral power will be on the same side, but different pins. The “L” indicates the pin that live power will go into.

Do you need a starter with LED tubes?

LED tubes do not need to have a starter (fuse) and can be fixed to be used without ballast. LED tubes are mostly used for home offices, garages and storage spaces at home.

Can I replace a T12 fluorescent light tube with an LED tube?

T8 LED tubes won’t fall out if you try to install them in a T12 fixture—they’ll fit just fine. But here’s some even better news: If you have a T12 fixture, conversion to LED is going to be even easier than with a T8 fixture. This is because T12 fixtures have non-shunted tombstones, exactly what you need for LED tubes.

How do you change a 2 ballast to a LED?



Quote from the video:
Quote from Youtube video: So I'm removing the wires coming to the ballast. And pulling everything back I'm gonna do the same on this side with this ballast cutting the wires close to the ballast. And pulling them back.

What happens if you don’t bypass the ballast for LED lights?

The most significant negative to a ballast-bypass linear LED is the risk of electric shock since the sockets carry line voltage. It’s a common practice to place a finger on the lamp pins while you are trying to install it, and this becomes a risky endeavor when using single-ended ballast-bypass lamps .

Can a ballast compatible LED be used without a ballast?

The T8 LED tube won’t work without the ballast, so you are forced to continue buying and replacing ballasts as long as you have an LED tube that is ONLY ballast dependent.

Can I bypass the ballast for plug and play LED lights?

Quote from the video:
Quote from Youtube video: Похожие запросы

What should I replace my fluorescent light with?



If You Want to Replace Your Fluorescent Fixture with an LED Fixture:

  1. Works with any LED tube without rewiring—just pop the tubes in and go.
  2. Clean, new fixtures update the overall look of your workplace.
  3. Lumens, watts, and lamp life depend on the tubes you purchase for it.

What can I use to replace fluorescent lights?

Replace the fluorescent bulbs with surface lights that are securely fastened to the ceiling. Check that they are light enough to illuminate the artwork you intend to hang. Track lighting is also an excellent option in this situation.

What can I use instead of a fluorescent light?

Thanks to advances in technology, LED lights are the very best alternative to fluorescent office lights. In more ways than one, modern LEDs are superior to fluorescent lighting technology today.

Can I replace a T12 fluorescent light tube with an LED tube?

T8 LED tubes won’t fall out if you try to install them in a T12 fixture—they’ll fit just fine. But here’s some even better news: If you have a T12 fixture, conversion to LED is going to be even easier than with a T8 fixture. This is because T12 fixtures have non-shunted tombstones, exactly what you need for LED tubes.

How do I convert a T12 light fixture to LED?



If you’re converting your existing T12 lamps to LED, you have six options to choose from:

  1. Install ballast-bypass linear LED lamps. …
  2. Install plug-and-play magnetic and electronic ballast-compatible linear LEDs. …
  3. Install electronic ballast-compatible linear LEDs and a new electronic ballast.

How do you bypass a T12 ballast for a LED?

Quote from the video:
Quote from Youtube video: 5 pin socket to start you'll want to remove the lamp cover by taking out the screws. Here you will see the exposed wires and of course the ballast. Which we are going to bypass.

How do I know if my ballast is T8 or T12?

If no markings are available, the size in diameter of the tube is the easiest way to determine the type you have installed. T8 tubes are 1-inch in diameter and T12 tubes are 1 1/2 -inch.

How do I know if my ballast is compatible with LED?

You can determine whether you have a compatible fixture in seconds. Simply turn the light on, then take a photo of the fixture using your smartphone or digital camera. If there are no dark bands on the resulting image, you have an electronic ballast that will work with direct drop-in LED tubes.

Can I put a T8 bulb in a T12 ballast?

Direct-wire compatible T8 LED tube lights can be used in a T12 fixture, as long as the T12 ballast is either bypassed, or completely removed.