How do you remove corroded brass nuts?

Heat the nut with a propane torch, taking care to avoid any adjacent flammable surfaces. The heat may expand it so that it will loosen. Tap the nut with a hammer to attempt to break the corrosion which is binding the nut.

How do you loosen tight copper pipe fittings?






Quote from Youtube video: And it's very hard a little elbow grease maybe a little heat. And some penetrating oil and be careful because the penetrating oil is highly combustible.

How do you unscrew a tight pipe fitting?

Quote from the video:
Quote from Youtube video: Hold it in one hand and twist the tool clockwise with the wrench. And it should just loosen. So that's it next time you have a stuck pipe nipple try using an internal pipe wrench tool to remove it.

How do you lubricate brass fittings?

Quote from the video:
Quote from Youtube video: See one chop has a catalyst in it that makes the lubricant thin enough to spray. So if it has to be thin enough to spray. But then once it's on the brass. That that catalyst has to evaporate.

How do you loosen corroded plumbing connections?

How to Loosen Corroded Plumbing

  1. Spray lubricant on the outside of a corroded joint and give it time to seep into the joint and dissolve rust on the threads, which usually takes about five to 10 minutes.
  2. Grip the fitting you are trying to separate with one pipe wrench; grip the pipe to which it is attached with another.

How do you loosen a nut that won’t budge?





To loosen a nut or bolt that won’t come off, start by spraying the connection with penetrating oil. Allow the oil to soak in for a time, then try loosening it with a wrench. To allow for more torque on the nut or bolt, slip a piece of metal pipe over the handle of the wrench to give you more leverage when turning it.

How do you unscrew a threaded pipe?

With a wrench on each nut, turn the ring nut counterclockwise. When unscrewing pipe, use the second wrench to keep the fitting from turning while you unscrew the ring nut. Once it’s unthreaded, you have the break you need and can start unscrewing the pipes from their fittings.

How do you unstick metal pipes?

Quote from the video:
Quote from Youtube video: Part are angled upwards so they will dig. Into the nut as we loosen it and then these teeth on the claw side the movable side see see how they're angled downward like this they will dig into the nut.

How do you remove compression fittings from brass?

Quote from the video:
Quote from Youtube video: And place the forks of the puller behind the compression ring and nut. Next turn the puller handle clockwise until the compression ring and nutter pulled loose from the copper.

What is the best lubricant for brass?



Brass Lubricants

  • Top Rated. Blue Juice Valve Oil. …
  • Top Rated. Yamaha Trombone Lubricant. …
  • Top Rated. Al Cass Fast Valve, Slide and Key Oil. …
  • Best Seller. Yamaha Regular Synthetic Valve Oil. …
  • Top Rated. La Tromba T2 Valve Oil For Monel & Steel Valves. …
  • Top Rated. Yamaha Light Synthetic Valve Oil. …
  • Top Rated. …
  • Top Rated.

Can I use WD 40 instead of plumbers grease?

We mentioned Vaseline is similar, but since most faucet seals and O-rings are made of Nitrile Butadiene Rubber, Vaseline can break down the products in it and ruin the seals. Other products that might seem like they could work are olive oil and WD-40. Do not use these. They are very thin and won’t stay in place.

Can you use anti seize on brass?

Mill-Rose Blue Monster Copper Anti-Seize is non- corrosive, and prevents the corrosion and seizing of threads. For Use With: All types of metal including stainless steel, nickel, copper, cast iron, brass and titanium.

When should you not use copper anti-seize?



Copper Grade Anti-Seize is copper in color and is not recommended for applications where copper is prohibited. Like Silver Grade, Copper Anti-Seize protects metal parts against rust, corrosion, galling and seizure at temperatures up to 1800° F.

What’s the best type of anti-seize?

The Best Anti-Seize Products

  1. Permatex 80208 Anti-Seize Lubricant. …
  2. Permatex 81464 Anti-Seize Lubricant. …
  3. Permatex 81343 Anti-Seize Lubricant. …
  4. Permatex 77164 Nickel Anti-Seize Lubricant. …
  5. Permatex 31163 Copper Anti-Seize Lubricant. …
  6. Loctite 299175 Paste Anti-Seize Lubricant. …
  7. Loctite 37617 Anti-Seize Lubricant.

Is anti-seize better than Grease?

Designed to convert torque to tightening force more efficiently, anti-seize is formulated with high solids content and a carrier grease.



Anti-Seize.

Grease Anti-Seize
Good for fast-moving, low contact, low pressure applications Good for slow-moving, extremely high contact and high-pressure applications

Can you use WD-40 as anti-seize?

WD-40 should not be used on lug nuts whether to try to remove them or to clean off rust. By applying oil, grease, or an anti-seize preparation to the threads, you run the risk of over-torquing them when you tighten up your wheels. WD-40 tends to be more of a band-aid fix than anything.

What can I use if I don’t have anti-seize?



Silicone grease would be better for this than anti-seize.