How do you remove a broken 4×4 fence post?


Quote from Youtube video: Use a digging bar if you have hard-packed or rocky. Soil. Then wrap the chain around the concrete. And use the slip hook to latch the chain to itself pull the chain tight.

How do you get a 4×4 post out of the ground?





Quote from the video:
Quote from Youtube video: So first off you want to build a jig of some kind and I put two two by fours together it can be one all you need is just a surface to put on your tractor jack right here. So this is the thing that

How do you get t-post out of the ground?

Quote from the video:
Quote from Youtube video: I've got a pipe wrench just wrapped around my tee post. And then I've got a hydraulic jack underneath it and there easy peasy I just Jack that thing up. And it pulls straight up out of the. Ground.

How do you remove a broken fence post from a Metpost?

If the post is swollen in the metpost, no amount of manual leverage is going to get the post out.

  1. Drill a hole through the centre of the post from the side. OR attach some scrap wood on the side of the post.
  2. If you drilled through the post put a bar through the post.
  3. Use a trolley jack or bottle jack to lift the post out.


How do you get a fence post out of the ground?





The trick to removing a fence post is to apply force upward, so that you’re not fighting the strength of the earth on either side of the buried post. This can be done with a jack or machinery, or with a lever and some elbow grease. One of the best post-pulling techniques comes from Family Handyman reader Mike Barnes.

How do you remove a metal fence post from the ground without digging?

Quote from the video:
Quote from Youtube video: Water. You know five minutes with a hose no big deal and then I have two cinder blocks or two blocks can you put it the other way Hudson thank you just like that with a piece of two by ten a carjack.

How do you use a fence post puller?

Quote from the video:
Quote from Youtube video: And you want to set the base. Right behind the fence post. It has the this u-shaped notch. And it's ridged so they can grip onto. These little teeth that are on the front of the t-post.

How do you fix a broken fence post?

Quote from the video:
Quote from Youtube video: And I'll take something to kind of scrape in there. So I find the hole in the concrete where the post sits. So now you can see that what we're gonna do install this easy mender right there.

How do you replace a broken fence post in concrete?



Save yourself both time AND money by reading everything you need to know to replace a fence post without removing the concrete below!

  1. Take Down the Fence. …
  2. Remove the Main Post. …
  3. Remove any Remaining Pieces and Clear the Foundation. …
  4. Replace the Post. …
  5. Fill the Hole. …
  6. Re-Attach the Fence. …
  7. Removing Concrete and the Post.


Does post buddy work?

Yes, Post Buddy will work on a round post, as long as your post is set in a concrete base. It’s the concrete base which is important, as it provides a firm, below-ground anchor for our system. You will need to position the Post Buddys as close to directly opposite each other as possible when fixing a round post.

Are post spikes any good?



Fence post anchor spikes work well by allowing one to place and remove fence posts without having to dig large holes. A fence that uses fence post anchor spikes is just as stable as a fence with posts set in concrete, with the added benefit of minimizing the rotting of the fence posts.

Do fence post spikes need concrete?

Concrete-in fence post holders are designed for use where soil conditions are unsuitable for drive-in spikes. The “shoe” should be set into a 450mm (18 inch) cube of concrete so that the base plate sits flush with the surface of the concrete. Don’t forget to check it is level before allowing the concrete to go off!

Is 2 feet deep enough for fence posts?

The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).

Should fence posts be set in concrete?

Do Fence Posts Need To Be Set in Concrete? No, fence posts don’t need to be set in concrete, and there are plenty of other ways to fix your posts if this feels a bit too permanent. If you are using wooden posts, concrete may actually be the worst option.

How long will a 4×4 post last in concrete?



How Long Will A Treated 4×4 Last In The Ground? (Explained) A treated 4×4 will last 20 to 25 years in the ground if the conditions in the soil and climate are favorable. That number could increase to 40 to 75 years if you install the treated 4×4 in a cement ring rather than the soil.

How big of a hole do you need for a 4×4 post?

12 inches

The diameter of your post hole should be three times the diameter of your post. So, if you’re planning on using a four-inch round or 4×4-inch square post, your post hole will need to be 12 inches in diameter. For a six-foot-high fence post, we would need a hole that’s 36 inches deep and 12 inches in diameter.

How many bags of cement do I need to set a fence post?

4 bags



1 – 4 bags of concrete per fence post are typically what’s needed. This depends on the type of soil, fence design, height, post size and bag weight. In general the depth of the post’s hole needs to be 1/3 to 1/2 of the above ground height of the post.

Can you put dry concrete in a post hole?

Fast-setting concrete is ideal for setting posts because there’s no mixing—you simply pour the dry concrete from the bag right into the hole, then add water.

How do you set a 4×4 fence post?

Quote from the video:
Quote from Youtube video: Posts can be set using concrete. Or compacted soil if setting metal vinyl or composite posts all the posts should be set in concrete. This will result in a sturdier fence.