How do you remove a Kwikset faceplate?
Quote from the video:
Quote from Youtube video: So all you do is just put your screwdriver in there. And twist your screwdriver.
Can’t get Kwikset deadbolt off?
Quote from the video:
Quote from Youtube video: The way that they're set up you can torque it this way. But then there's they're missing apart there's missing a piece there to kind of turn it the other way.
How do you remove a deadbolt from the inside?
Quote from the video:
Quote from Youtube video: Once the screws are loose remove both sides of the lock. The deadbolt latch is held to the door with two screws on the edge of the door remove the two phillips screws. Now you can pull out the latch.
How do you remove a door latch without screws?
There should be a small latch near the base of the knob or handle, probably on the exterior side of the door. Push this latch in, and pull the handle off the door. Next, find a small slot on the edge of the trim piece. Insert the tip of a screwdriver and pry off the trim piece.
How do I remove a deadbolt faceplate?
Insert a flat-head screwdriver putty knife or similar tool into the notch or under the faceplate edge, prying outward with gentle pressure. The plate will unsnap from the interior mounting ring and will remove by pulling outward along the lever shaft.
How do you remove a Kwikset cover?
In order to remove the back cover, you will need a phillips screwdriver. First locate 3 screws, one on the left side, one on the right side and one under the cover. After removing the screws, simply pull the cover away from the door.
How do you remove a double keyed Kwikset deadbolt without visible screws?
Quote from the video:
Quote from Youtube video: Fit an allen key right through okay so now you have to have the bolt closed allen key goes all the way in turn it to the left. Okay and you should now be able s turn key face loose.
How do you remove a Kwikset Smartcode deadbolt?
Quote from the video:
Quote from Youtube video: The first step in replacing your hardware is to remove the existing deadbolt from your door pop the cover off the interior cover and remove the screws that hold the deadbolt in.
How do you remove a Kwikset deadbolt handle?
Quote from the video:
Quote from Youtube video: You would need a flathead screwdriver like. So and you would need to peel. This back bay here this bit we'll just bend it back. And end it back end it back. Until we start to get a little bit of room.
How do you remove a tubular latch?
Quote from the video:
Quote from Youtube video: Put them stick to one side and handle just come away from the door. Now can we move the latch from the door to do this you need to unscrew the two screws from the face of the latch.
How do you remove a pressed door latch?
Quote from the video:
Quote from Youtube video: And giving it a twist. Now loosen or remove the two screws and hold the latch assembly in place and slip it out finally remove the two screws that hold the latch bolt in. Place.
How do you remove a Kwikset door latch?
Quote from the video:
Quote from Youtube video: Just like that and carefully pull the locking ring off and as you pull this out this inner portion here as well as these screws. Go through their respective holes. So carefully pull this out.
