If you absolutely cannot get it to move, use heating and cooling to break the rust bonds: Heat the base of the pole with a torch (preferably acetylene, but propane if that’s all you have) and then blast it with a can of compressed air duster held upside down, so that liquid comes out.
How do you unstick a rusted pole?
Quote from the video:
Quote from Youtube video: So if you just give them a good sprayer with some spear penetrance and then leave them for a good 10 or 15 minutes when you come by some you'll normally find that you can undo.
How do you get a metal pole out of the ground?
Quote from the video:
Quote from Youtube video: Water. You know five minutes with a hose no big deal and then I have two cinder blocks or two blocks can you put it the other way Hudson thank you just like that with a piece of two by ten a carjack.
How do you get rusted metal unstuck?
Apply heat to the rusted join between the material surfaces using a propane torch, or if possible, place the rusted material in a freezer to cool the material. Heat will cause metal to expand and cold will cause metal to contract, each helping to dislodge the rust.
How do you get a concrete rod out of the ground?
Quote from the video:
Quote from Youtube video: Ah but you have to do with that chain wrap it around the post the grips the clothes.
What spray removes rust?
Best for Tools: Rust-Oleum Rust Dissolver Spray Gel
Rust-Oleum also makes the best rust remover for tools. The brand’s Rust Dissolver spray clings to the surface of iron, steel, chrome, and other types of metal and then quickly dissolves rust.
How do you remove a power pole?
For removal, slide one end of the “U” shape tool between the flat contact tip and the housing spring. Twist or lift the contact up off the spring, and pull the contact by the wire back out the rear of the housing. For insertion, rest the “U” shape tip around the wire putting pressure on the back barrel of the contact.
How do you remove a pole?
Quote from the video:
Quote from Youtube video: And a chain all right let's do this first dig up around the pole yeah perhaps hit concrete huh. Once you've got enough stuff dug up and you can drill some holes drill some holes.
How do you remove metal T post?
Position a garden hose to be running into the ground where the T-post is. While water flows freely into the post hole, start rocking the T-post back and forth. You will continue this motion until the ground loosens around the T-post and you can pull it free.
How do you remove concrete from a metal pole?
You’d probably need a decent piece of steel. Put a piece of angle iron on the floor jack pad and it should split/destroy the concrete. You could also use a standard hydraulic jack (they are very cheap, 20 tons or more for little $) if you can find a place to brace the jack and concrete you’re working on.
How do you get a metal pole out of concrete?
Quote from the video:
Quote from Youtube video: Little air should do the trick. And next I'll go ahead and drill a 1/2 inch hole with my super awesome boss Bulldog hammer drill which goes through old concrete hard concrete just like butter.
How do you remove metal from concrete?
If your metal posts have been set in buried concrete, it’s best to pull the concrete out with the each post, and with mechanical help, you can avoid excessive digging. Drill a 1/2-inch hole through each post — about 4 inches above the ground — and insert a length of 3/8-inch re-bar to provide a grip.
How do you remove a basketball pole from concrete?
How to Remove a Basketball Pole: A Step by Step Guide
- Step 1: Check for buried utilities. …
- Step 2: Clear the area. …
- Step 3: Begin digging. …
- Step 4: Dig to the bottom of the pole. …
- Step 5: Rock the pole back and forth. …
- Step 6: Walk the pole down to the ground. …
- Step 7: (Optional) Remove the concrete.
How do you disassemble a basketball pole?
Quote from the video:
Quote from Youtube video: High making sure that the pole lands evenly on the ground. This creates small vibrations which eventually leads to the poles separating.
How much does it cost to remove a basketball pole?
Our average cost for a basketball hoop removal service is $100. This price includes disassembly and removal.
What do you do with old basketball poles?
Repurposed an old basketball pole by attaching a wrought iron plant hanger and topping it with a concrete finnial. Repurposed an old basketball pole by attaching a wrought iron plant hanger and topping it with a concrete finnial.
How do you remove sand from basketball base?
Quote from the video:
Quote from Youtube video: Shooting up in there there's blasting everything out okay it's working you put water in them so you can drain them if you ever need to move them this thing weighs several hundred pounds with sand it.
How do you remove a basketball backboard?
How to Replace Basketball Backboard: A Step-by-Step Guide
- Step 1: Lay the basketball goal on its side. …
- Step 2: Measure your backboard. …
- Step 3: Get your backboard material. …
- Step 4: Paint your backboard material. …
- Step 5: Remove the rim. …
- Step 6: Remove the old backboard material. …
- Step 7: Drill holes to mount the rim.
